Template:Chembox Properties/doc

Usage

This box can be used as a complete section inside the {{chembox}}. Copy the left column into an existing Chembox.

| Section2 = {{Chembox Properties <!-- {{Chembox Properties}} - incomplete list -->
| Properties_ref = <!-- Reference -->
| Formula = <!-- Chemical formula -->
| Formula_ref = <!-- Reference -->
| Formula_Comment =
| C= | H= | N= <!-- per element (alternative input) (etc) -->
| Formula_Charge = <!-- Molecular charge -->
| MolarMass = <!-- Molecular weight, including unit -->
| MolarMassRound =
| MolarMass_ref = <!-- Reference -->
| MolarMass_notes =
| Appearance =
| Odor = | Odour =
| Density = <!-- Density, including unit -->
| MeltingPt = <!-- Melting point description; optional. E.g. "Decomposes at" -->
| MeltingPtC = <!-- Number, in Celsius. Is converted to F and K -->
| MeltingPtF = <!-- Number, in Fahrenheit. Is converted to C and K -->
| MeltingPtK = <!-- Number, in Kelvin. Is converted to C and F -->
| MeltingPt_ref = <!-- Reference -->
| MeltingPt_notes = 
| BoilingPt = <!-- Boiling point description; optional. E.g. "Decomposes at" -->
| BoilingPtC = <!-- Number, in Celsius. Is converted to F and K -->
| BoilingPtF = <!-- Number, in Fahrenheit. Is converted to C and K -->
| BoilingPtK = <!-- Number, in Kelvin. Is converted to C and F -->
| BoilingPt_ref = <!-- Reference -->
| BoilingPt_notes = 
| CriticalTP = <!-- [[Critical temperature and pressure]], including units -->
| SublimationConditions =
| Solubility = <!-- Solubility in water ([[Aqueous solution]]) -->
| SolubilityProduct =
| SolubilityProductAs =
| SolubleOther =
| Solvent =
| Solubility1 =
| Solvent1 =
| Solubility2 =
| Solvent2 =
| Solubility3 =
| Solvent3 =
| Solubility4 =
| Solvent4 =
| Solubility5 =
| Solvent5 =
| Solubility6 =
| Solvent6 =
| CMC = <!-- [[Critical micelle concentration]], including unit -->
| HLB = <!-- [[Hydrophilic-lipophilic balance]], including unit -->
| LogP = <!-- [[Partition coefficient]] -->
| VaporPressure = <!-- [[Vapor pressure]], including unit -->
| HenryConstant = <!-- Henry's law constant (kH) -->
| AtmosphericOHRateConstant = <!-- Atmospheric OH rate constant -->
| pKa =
| pKb =
| ConjugateAcid = <!-- [[Conjugate acid]] -->
| ConjugateBase = <!-- [[Conjugate base]] -->
| IsoelectricPt = <!-- [[Isoelectric point]] (pI) -->
| ElectricalResistivity =
| LambdaMax =
| Absorbance =
| BandGap =
| ElectronMobility =
| SpecRotation =
| MagSus = <!-- [[Magnetic susceptibility]], including unit -->
| ThermalConductivity =  <!-- [[Thermal conductivity]], including unit -->
| RefractIndex = <!-- [[Refractive index]] -->
| Viscosity = <!-- [[Viscosity]], including unit -->
| CriticalRelativeHumidity =
| Dipole =
| OrbitalHybridisation =
| SpecificSurfaceArea =
| PoreVolume =
| AveragePoreSize = 
}}

Chemical formula

Chemical formula by element:

 | C= | H= | N= | O= (etc., 118 elements)
 | Formula_Charge= 
 | Formula_ref=
 | Formula_Comment

OR hardcoded (formula input will show unedited)

 | Formula= 
 | Formula_ref=
 | Formula_Comment=

Temperatures

Temperatures for both for the melting point and boiling point can be entered in multiple ways. |MeltingPt= and |BoilingPt= allow any textual input. E.g.:

|MeltingPt=Unknown shows: Unknown

When supplying a temperature value (the numerical value in either °C, °F or K), the infobox will calculate and present all three temperatures. Only one of the three _C, _F, _K values may be entered. E.g.:

|MeltingPtC=100 shows: 100 °C; 212 °F; 373 K

To show a temperature range, simply add the corresponding _CH high value (_FH, _KH). E.g.:

|MeltingPtF=50 |MeltingPtFH=75 shows 10 or 24 °C; 50 or 75 °F; 283 or 297 K

All available temperature parameters:

• |MeltingPt=
  • Any text, shown literally
  • Prefix before calculations
• |MeltingPtC=: Temperature in Celsius; numerical
• |MeltingPtF=: Temperature in Fahrenheit; numerical
• |MeltingPtK=: Temperature in Kelvins; numerical
• |MeltingPt_ref=: Reference
• |MeltingPt_notes=: Any text added as a postfix

• |BoilingPt=
  • Any text, shown literally
  • Prefix
• |BoilingPtC=: Temperature in Celsius; numerical
• |BoilingPtF=: Temperature in Fahrenheit; numerical
• |BoilingPtK=: Temperature in Kelvins; numerical
• |BoilingPt_ref=: Reference
• |BoilingPt_notes=: Any text added as a postfix

Example

• Ammonia (and some exemplary additions)

Ammonia

Properties
Chemical formula	NH3
Molar mass	17.031 g·mol−1
Appearance	Colourless gas
Odor	Strong pungent odor
Density	0.86 kg·m−3 (1.013 bar at boiling point) 0.73 kg·m−3 (1.013 bar at 15 °C) 681.9 kg·m−3 at −33.3 °C (liquid)
Melting point	−77.73 °C (−107.91 °F; 195.42 K)
Boiling point	−33.34 °C (−28.01 °F; 239.81 K)
Solubility in water	47% (0 °C) 31% (25 °C) 28% (50 °C)
Solubility	Soluble in chloroform, ether, ethanol, methanol
log P	logP
Vapor pressure	8573 hPa
Acidity (pKa)	32.5 (−33 °C), 10.5 (DMSO)
Basicity (pKb)	4.75
Refractive index (nD)	1.3327
Viscosity	0.276 cP (−40 °C)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa). Infobox references

{{Chembox
| Name = Ammonia
|Section2 = {{Chembox Properties
| Formula = NH<sub>3</sub>
| MolarMass = 17.031{{nbsp}}g·mol<sup>−1</sup>
| Appearance = Colourless gas
| Odor = Strong pungent odor
| Density = 0.86&nbsp;kg·m<sup>−3</sup> (1.013{{nbsp}}bar at boiling point)<br
/>0.73&nbsp;kg·m<sup>−3</sup> (1.013{{nbsp}}bar at 15&nbsp;°C)<br
/>681.9&nbsp;kg·m<sup>−3</sup> at −33.3&nbsp;°C (liquid)
| MeltingPtC = −77.73
| BoilingPtC = −33.34
| Solubility = {{ubl
 | 47% (0&nbsp;°C)
 | 31% (25&nbsp;°C)
 | 28% (50&nbsp;°C)<ref>{{cite book |url=https://books.google.com/?id=0fT4wfhF1AsC&pg=PA17 |page=17 |title=Handbook of inorganic compounds |last1=Perry |first1=Dale L. |last2=Phillips |first2=Sidney L. |publisher=CRC Press |year=1995 |isbn=0-8493-8671-3 }}</ref>
 }}
| SolubleOther = soluble in [[chloroform]], [[ether]], [[ethanol]], [[methanol]]
| Solvent =
| pKa = 32.5 (−33&nbsp;°C),<ref>Perrin, D. D.; ''Ionisation Constants of Inorganic Acids and Bases in Aqueous Solution'', 2nd ed., Oxford: Pergamon Press, '''1982'''</ref> 10.5 (DMSO)
| pKb = 4.75
| RefractIndex = 1.3327
| Viscosity = 0.276&nbsp;cP (−40&nbsp;°C)
| VaporPressure = 8573&nbsp;hPa
| LogP = logP
  }}
}}

Tracking category

• Category:Pages using Chembox with unknown parameters (0)

TemplateData

TemplateData documentation used by VisualEditor and other tools

See a monthly parameter usage report for Template:Chembox Properties in articles based on its TemplateData.

TemplateData for Chembox Properties

Adds a subsection to {{Chembox}}. To be used: |Section2={{Chembox Properties|...}}

Template parameters

Parameter		Description	Type	Status
ExactMass	ExactMass	no description	Unknown	optional

References

These references will appear in the article, but this list appears only on this page.