Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

Jump to content

Talk:Freedom Arms

Page contents not supported in other languages.
Add topic
From Wikipedia, the free encyclopedia

Serial Number Info

[edit]

Please provide any serial number info verified by FA here please.

D9567 454 7.5" - Shipped 06-17-1986

DF1306 454 4.75" - Shipped 09-30-1988

Minutiae

[edit]

Early FA M83 pistols had a nut holding the mainspring in the frame. This was replaced in 199? by a slot in the frame that retains the mainspring.

In 199? FA introduced a bushing retained firing pin upgrade that makes firing pin replacement a simple task. The factory will upgrade older guns with the press-fit fp for a nominal charge.

Intermediate era (1992-199?) guns are often seen with a replaceable carbide forcing cone insert retained by a set screw on the right side of the frame.

The factory Premier finish is applied using a worn piece of brown ScotchBrite. Minor finish blemishes can be removed from Premier Grade guns by softening a piece of brown ScotchBrite and rubbing gently in the direction of the original finish. Field Grade guns are grit blasted and should not be touched-up with ScotchBright.

Older M83 guns that do not carry a Field Grade or Premier Grade designation are Premier Grade. All silhouette model pistols were Field Grade finished.

All M97 guns are Premier Grade.