Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

Jump to content

Scanoe

From Wikipedia, the free encyclopedia
Interior view
Profile showing 2 horsepower (1.5 kW) outboard motor

A Scanoe is a brand of boat originally built and named by Coleman, debuted in the 1980's.[1] It is a cross between a skiff and a canoe. It is wider than a conventional canoe and has a flat stern so that a small outboard motor can be mounted if needed, but it is lightweight enough (about 120 pounds (54 kg)) to be portaged or transported on a vehicle roof as opposed to on a trailer.

The Scanoe debuted in 1985 with a horsepower rating of 1.75 and a width of 38 inches, in 1989 the transom capacity was upped to 5 horsepower and the width was increased to 40 and then 43 inches. Later the Scanoe was produced with Coleman's Ram X plastic.[2] Later Pelican bought the brand name from Coleman in approximately 2001 and tried the concept but dropped it a few years later.[3] The term remained and remains in some use often referred to as a "Scout canoe".[3][1] The term loosely refers to a square stern canoe, albeit usually with some association with the Coleman and Pelican versions.[4]

References

[edit]