PS-ON Signal

PS-ON Signal is a pin on a 20-pin or 24-pin ATX-specified power connector used to turn a personal computer power supply unit on/off. The PS_ON pin is normally pulled high in an open-circuit, but will turn on the power supply when it is pulled low, by shorting it to the GND (COM) terminal. Conversely the power supply is turned off when the PS-ON is in open-circuit. ^[1]^[2]

The PS_ON pin can be jumpered to manually turn a PSU on.^[3]

References

↑ "SG6516 PC Power Supply Supervisors" (PDF). Fairchild Semiconductor. Archived from the original (PDF) on 2018-08-21. Retrieved August 21, 2018.
↑ "Desktop Platform Form Factors Power Supply Design Guide" (PDF). Intel Corporation. Retrieved August 21, 2018.
↑ "How to Jump a PSU | bit-tech.net". bit-tech.net. Retrieved 2023-12-11.

[1] "SG6516 PC Power Supply Supervisors" (PDF). Fairchild Semiconductor. Archived from the original (PDF) on 2018-08-21. Retrieved August 21, 2018.

[2] "Desktop Platform Form Factors Power Supply Design Guide" (PDF). Intel Corporation. Retrieved August 21, 2018.

[3] "How to Jump a PSU | bit-tech.net". bit-tech.net. Retrieved 2023-12-11.

[1]

[2]

[3]

This page was redesigned at the edge.

References