OpenEVSE

OpenEVSE ("Electric Vehicle Supply Equipment") is an Arduino-based charging station created by Christopher Howell and Sam C. Lin.^[1] The charger is composed of open-source software^[2] and hardware that can be made by individuals.^[3]

The project started in February 2011,^[4]^[1] with an experiment aimed at generating the SAE J1772 pilot signal^[5] on an Arduino-compatible ATmega328 8-Bit AVR MCU. Subsequent experiments continued until a prototype J1772-compatible controller was created.

References

1 2 "Our Story". store.openevse.com. Retrieved 29 June 2025.
↑ "OpenEVSE". GitHub. Retrieved 29 June 2025.
↑ Howell, Christopher. "Discontinued May 2018 - v4 Standard". openevse.dozuki.com. Retrieved 29 June 2025.
↑ "Weekend(s) Project - DIY EVSE". My Nissan Leaf Forum. 15 February 2011. Retrieved 9 September 2019.
↑ "openEVSE - openalia". openalia.wordpress.com. 13 May 2012. Retrieved 1 May 2019.

External links

Official website

This article about an automotive part or component is a stub. You can help Wikipedia by adding missing information.

[about-1] 1 2 "Our Story". store.openevse.com. Retrieved 29 June 2025.

[2] "OpenEVSE". GitHub. Retrieved 29 June 2025.

[3] Howell, Christopher. "Discontinued May 2018 - v4 Standard". openevse.dozuki.com. Retrieved 29 June 2025.

[4] "Weekend(s) Project - DIY EVSE". My Nissan Leaf Forum. 15 February 2011. Retrieved 9 September 2019.

[5] "openEVSE - openalia". openalia.wordpress.com. 13 May 2012. Retrieved 1 May 2019.

[1]

[2]

[3]

[4]

[5]

This page was redesigned at the edge.

References

External links