Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

Jump to content

Modulation doping

From Wikipedia, the free encyclopedia
Modulation doping is a technique for fabricating semiconductors such that the free charge carriers are spatially separated from the donors.

Modulation doping is a technique for fabricating semiconductors such that the free charge carriers are spatially separated from the donors. Because this eliminates scattering from the donors, modulation-doped semiconductors have very high carrier mobilities.

History

[edit]

Modulation doping was conceived in Bell Labs in 1977 following a conversation between Horst Störmer and Ray Dingle,[1] and implemented shortly afterwards by Arthur Gossard. Störmer and Dan Tsui used a modulation-doped wafer to discover the fractional quantum Hall effect.

Implementation

[edit]

Modulation-doped semiconductor crystals are commonly grown by epitaxy to allow successive layers of different semiconductor species to be deposited. One common structure uses a layer of AlGaAs deposited over GaAs, with Si n-type donors in the AlGaAs.[2]

Applications

[edit]

Field effect transistors

[edit]

Modulation-doped transistors can reach high electrical mobilities and therefore fast operation.[3] A modulation-doped field-effect transistor is known as a MODFET.[4]

Low-temperature electronics

[edit]

One advantage of modulation doping is that the charge carriers cannot become trapped on the donors even at the lowest temperatures. For this reason, modulation-doped heterostructures allow electronics to be operated at cryogenic temperatures.

Quantum computing

[edit]

Modulation-doped two-dimensional electron gases can be gated to create quantum dots. Electrons trapped in these dots can then be operated as quantum bits.[5]

References

[edit]
  1. Horst L. Störmer, Nobel Biography
  2. Gossard, A. C. (1985). "Modulation Doping of Semiconductor Heterostructures". Molecular Beam Epitaxy and Heterostructures. pp. 499–531. doi:10.1007/978-94-009-5073-3_14. ISBN 978-94-010-8744-5.
  3. L.D. Nguyen; L.E. Larson; U.K. Mishra (2009). "Ultra-high speed modulation-doped field-effect transistors: a tutorial review". Proc. IEEE. 80 (4): 494. doi:10.1109/5.135374.
  4. Global Standards for the Microelectronics Industry - modulation-doped field-effect transistor (MODFET)
  5. Hanson, R.; Kouwenhoven, L. P.; Petta, J. R.; Tarucha, S.; Vandersypen, L. M. K. (2009). "Spins in few-electron quantum dots". Rev. Mod. Phys. 79 (2): 1217. arXiv:cond-mat/0610433. Bibcode:2007RvMP...79.1217H. doi:10.1103/RevModPhys.79.1217. S2CID 9107975.