Mixed flow compressor
A mixed flow compressor, or diagonal compressor, combines axial and radial components to produce a diagonal airflow compressor stage.[1][2] The exit mean radius is greater than at the inlet, like a centrifugal design, but the flow tends to exit in an axial rather than radial direction. This eliminates the need for a relatively large diameter exit diffuser associated with centrifugal compressors. The impeller can be machined from solid using NC machines, in much the same way as that of a centrifugal design.
Diagonal compressors were widely experimented during and just after World War II, but did not see much service use. A diagonal-flow compressor is featured since 2001 in the Pratt & Whitney Canada PW600 series turbofan engines used in the Phenom 100, Eclipse 500, Cessna Citation Mustang and other very light jet aircraft.
See also
[edit]References
[edit]- ↑ "Mixed Flow Compressors | Turbomachinery blog". blog.softinway.com. 2016-12-08. Retrieved 2022-12-18.
- ↑ Xuanyu, Chen; Xiangwei, Meng; Xingmin, Gui; Donghai, Jin (2015-01-01). "The Aerodynamic Design and Investigation of Loading Distribution of a Mixed Flow Compressor". Procedia Engineering. 2014 Asia-Pacific International Symposium on Aerospace Technology, APISAT2014 September 24-26, 2014 Shanghai, China. 99: 484–490. doi:10.1016/j.proeng.2014.12.562. ISSN 1877-7058.
 | This article about a mechanical engineering topic is a stub. You can help Wikipedia by adding missing information. |