Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

Jump to content

Kayaba Ku-3

From Wikipedia, the free encyclopedia
Ku-3
General information
TypeResearch glider
National originJapan
ManufacturerKayaba Industry
Designer
Number built1
History
First flightFebruary 1941

The Kayaba Ku-3 was a glider built in Japan in 1941 to investigate the possibilities of tailless aircraft. Building on the success of the Ku-2 design of the previous year, the Ku-3 was a substantially larger aircraft with several novel features. The small vertical fins of the Ku-2 were abandoned, leaving the Ku-3 with no vertical control surfaces.

The crescent wing had three pairs of control surfaces on the trailing edge. The outer, less-swept wing sections had a greater dihedral than the inner sections.

The prototype crashed after 67 flights, when the test pilot was unable to recover from a spin.

References

[edit]
  • Wooldridge, E.T. "Japanese flying wings". History of the Flying Wing. Retrieved 29 April 2007.
  • 日本飞翼的短暂研究 Archived 2012-02-13 at the Wayback Machine