Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

Jump to content

Draft:Cornel Stan

From Wikipedia, the free encyclopedia
Cornel Stan
Born
Cornel Stan

(1951-04-28) 28 April 1951 (age 75)
OccupationsEngineer, professor, writer
Known forAlternative Propulsion for Automobiles, High Pressure Pulse Direct Injection,

Cornel Stan (born April 28, 1951, in Constanța, Romania), is a German engineer and professor.[1]

Life and career

[edit]

Stan’s teaching and research areas include motor vehicle drive systems,[2][3][4][5] direct injection processes,[6][7][8][9] simulation of thermodynamic processes, combustion processes, alternative fuels[10][11] and energy management in vehicles.[12] Stan is the author of a patent on unconventional injection processes in internal combustion engines.[13]

Stan organized and led several international congresses and conferences, among others: "Alternative Propulsion Systems for Automobiles", Essen 2000; "Development Trends of Motorcycles", Zwickau 2002, Munich 2003, Borgo Panigale / Ducati, 2004, 2005, 2007;[14] "Alternative Propulsion Systems for Automobiles", Berlin 2007, Munich 2009; "VDIK-Future Propulsion of Automobiles", AMI Leipzig, 2009, 2010, 2012, 2014, 2016.[15]

Awards and distinctions

[edit]
  • Fellow of the Society of Automotive Engineers SAE International, 2008[16]
  • Honorary Professor at Transilvania University of Brasov, Romania, 2004
  • Doctor Honoris Causa at Transilvania University of Brasov, Romania, 2005[17]
  • Doctor Honoris Causa at Ovidius University of Constanta, Romania, 2018[18]
  • Doctor Honoris Causa at University of Craiova, Romania, 2022[19]
  • Since 2024 honorary member of the Technical Sciences Academy of Romania.[20]

Bibliography

[edit]

Books (selection)

[edit]
  • Stan, C.: Alternative Propulsion for Automobiles , Springer Nature Switzerland 2017, ISBN 978-3-319-31929-2
  • Stan, C.: Direct Injection Systems – The Next Decade in Engine Technology, SAE International, Warrendale, USA 2002, ISBN 0-7680-1070-5
  • Stan, C.: Direct Injection Systems for Spark-Ignition and Compression Ignition Engines, SAE International Edition, Warrendale / USA, 2000, ISBN 0-7680-0610-4
  • Stan, C.: (Publisher) et al.: Development Trends of Motorcycles IV, Expert Verlag 2012, ISBN 978-3-8169-3160-7
  • Sher, E. (Publisher) et al.: Handbook of Air Pollution from Internal Combustion Engines (Chapter 12 by C. Stan), Academic Press, San Diego / USA, 1998, ISBN 0-12-639855-0
  • Stan, C.: Cipolla, G. (Publishers) et al.: Alternative Propulsion Systems for Automobiles II, Expert Verlag, Renningen, 2008, ISBN 978-3-8169-2835-5
  • Stan, C.: Thermodynamics for Machines and Automobile Engineering – in German (Thermodynamik für Maschinen- und Fahrzeugbau), Springer Vieweg, 2020, ISBN 978-3-662-61789-2, DOI: 10.1007/978-3-662-61790-8
  • Stan, C.: Alternative Propulsion Systems for Automobiles – in German (Alternative Antriebe für Automobile), 5th Edition, Springer Vieweg, 2020, ISBN 978-3-662-61757-1
  • Stan, C.: Automobile Thermodynamics – Basics, Applications and Process Simulations – in German (Thermodynamik des Kraftfahrzeugs – Grundlagen und Anwendungen – mit Prozesssimulationen) 3rd Edition, 2017, Springer Vieweg 2017, ISBN 978-3-662-53721-3
  • Stan, C. (Publisher): Trends in the Automobiles Development - in German - (Entwicklungstendenzen im Automobilbau), Zschiesche Verlag, 2004, ISBN 3-9808512-1-4
  • Stan, C.: Energy versus Carbon Dioxide: How can we save the world? 59 Theses, Springer Berlin, Heidelberg, 2021, ISBN 978-3-662-64161-3, DOI: 10.1007/978-3-662-64162-0
  • Stan, C.: Future Fire Forms: Heat, Work and Thermodynamics, Springer Vieweg, 2023, ISBN 978-3-031-12083-1, DOI: 10.1007/978-3-031-12081-7
  • Stan, C.: Energy Scenarios for the Future: Ways to Climate-friendly Mobility, Heating and Industry, Springer Vieweg, 2024, ISBN 978-3-662-69686-6, DOI: 10.1007/978-3-662-69687-3

Novels

[edit]
  • Stan, C.: Carmakers – A Novel, Coresi Publishing, 2017, ISBN 978-1974647200 (English)
  • Stan, C.: Dracfried – Dracula versus Diesel – A Vampire Novel, Coresi Publishing, 2017, ISBN 978-1976021169 (English)
  • Stan, C.: English Passage in Bucharest – A Novel, Coresi Publishing, 2025, Translated from the Romanian by Cornel Stan (Romanian Novels Around the World) ISBN 979-8280205512 (English)

References

[edit]
  1. ^ “Cornel Stan at SAE International, Search Results
  2. ^ Stan, Cornel. “Thermal Engines”. Springer International Publishing. DOI 10.1007/978-3-319-31930-8_2
  3. ^ Stan, Cornel. “Combination of Propulsion Systems”. Springer International Publishing. DOI 10.1007/978-3-319-31930-8_5
  4. ^ Stan, Cornel. “Electric Propulsion Systems”. Springer International Publishing. DOI 10.1007/978-3-319-31930-8_4
  5. ^ Sher, Eran. “Handbook of Air Pollution from Internal Combustion Engines”. Academic Press. Chapter 12 by C. Stan.
  6. ^ Stan, C.; Lefebvre, J.-L. “Development of a Direct Injection Concept for Two Wheelers Equipped with Two Stroke Engines”. SAE Transactions Journal, Vol. 108, 1999 , SAE Paper 1999-01-1248
  7. ^ Grimaldi, C.; Postrioti, L.; Stan, C.; Troeger, R. “Analysis Method for the Spray Characteristics of a GDI System with High Pressure Modulation” SAE Transactions Journal, Vol. 109, 1999, SAE Paper 2000-01-1043
  8. ^ Stan, C.; Troeger, R.; Stanciu, A.; Martorano, L.: Tarantino, C.; Antonelli, M. “GDI Four Stroke SI Engine for Two Wheelers and Small Vehicle Applications” SAE Transactions Journal, Vol. 111, 2002, SAE Paper 2002-32-1792
  9. ^ Newspaper “Welt”, Die E10-Hysterie, das ist Volksverdummung
  10. ^ Stan, Cornel. “Alternative Fuels” Springer International Publishing. DOI 10.1007/978-3-319-31930-8_3
  11. ^ Stan, C.; Troeger, R.; Guenther, S.; Stanciu, A.; Martorano, L.: Tarantino, C.; Lensi, R. “Internal Mixture Formation from Gasoline to Ethanol”. SAE Transactions Journal, Vol. 110, 2001, SAE Paper 2001-01-1207
  12. ^ Stan, Cornel. “Energy Management in the Automobile as a Complex System”. Springer International Publishing. DOI 10.1007/978-3-319-31930-8_6
  13. ^ Stan, Cornel. “Method for Fuel Injection in Multicylinder Engines and device for the Implementation of said Method “. United States Patent US006189508B1.
  14. ^ "5th International Motorcycle Conference at Ducati, 18th – 19th October 2012". Archived from the original on 2020-12-08. Retrieved 2020-08-03.
  15. ^ “Future Propulsion of Automobiles” Five International Congresses of Auto Mobil International (AMI) between 2009 – 2016, in Leipzig, Germany
  16. ^ “Cornel Stan, SAE Fellow”SAE International Announces 2008-2009 Class of SAE Fellows
  17. ^ "Cornel Stan, Doctor Honoris Causa at the "Transylvania" University of Brasov, Romania, 2005". Archived from the original on 2020-12-03. Retrieved 2020-08-03.
  18. ^ Cornel Stan, Doctor Honoris Causa at the “Ovidius” University of Constanta, Romania, 2018
  19. ^ Cornel Stan, Doctor Honoris Causa at the Craiova University, Romania, 2022
  20. ^ Cornel Stan, honorary member of the Romanian Academy of Technical Sciences, 2024
[edit]