Edge Rewrite
everything Source code View original
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a4052cf20cb13337

Jump to content

Riprap

From Wikipedia, the free encyclopedia
Riprap used to protect a streambank from erosion

Riprap (in North American English), also known as rip rap, rip-rap, shot rock, rock armour (in British English) or rubble, is human-placed rock or other hard, heavy, unconsolidated material used to protect shoreline structures against scour and water, wave, or ice erosion.[1][2][3] Riprap is used to armor shorelines, streambeds, bridge abutments, foundational infrastructure supports and other shoreline structures against erosion.[1][2][3] Common rock types used include granite and modular concrete blocks.[4][5] Rubble from building and paving demolition is sometimes used,[3][6] as well as specifically designed structures called tetrapods or similar concrete blocks. Riprap is also used underwater to cap immersed tubes sunken on the seabed to be joined into an undersea tunnel.[citation needed]

Design and installation

[edit]

Riprap design takes into account the size and gradation of the rock, the thickness of the protective layer, water flow and wave conditions, the slope being protected and the characteristics of the underlaying soil. Rock size is commonly described using D50, which represents the median particle size in a graded riprap mixtures.[7]

Riprap generally consists of a range of stone sizes rather than uniformly sized rocks. The stones are placed to form a stable protective layer while still allowing the water to move through the spaces between them. Where necessary, a granular filter layer or geotextile is installed beneath the riprap to reduce the loss of soil particles and help prevent the layer from being undermined. [8]

The amount of riprap required for a project depends on surface area being protected and the specified thickness of the rock layer. These dimensions can be used to estimate the volume of material required, while the approximate weight depends on the bulk density of the selected rock. [9]

Environmental effects

[edit]

Sediment effects

[edit]

Riprap causes morphological changes in the riverbeds they surround. One such change is the reduction of sediment settlement in the river channel, which can lead to scouring of the river bed as well as coarser sediment particles. This can be combatted by increasing the distance between the pieces of riprap and using a variety of sizes.[10]

The usage of riprap may not even stop erosion, but simply move it downstream.[11] Additionally, the soil beneath the riprap can be eroded if the rock was just placed on top without any buffer between the layers such as a geotextile fabric or smaller riprap (crushed stone).[12]

Changes in organic material and the ecosystem

[edit]

Riprap affects the amount of organic material in a waterbody by acting as a filter, catching wood and leaves before they can enter the water.[11] Riprap also covers and prevents plants from growing through, which can reduce shade over the water.

Introducing ripraps creates a rocky environment that can affect a waterbody's ecology by making the ecosystem more heterogeneous.[13] While it can negatively affect some organisms by removing shoreline vegetation, the rock can provide important refuge for invertebrates and small fish.[11][14] By preventing woody plants from growing and shading the water, riprap can also increase the amount of algae and hydrophytes.[15]

[edit]

See also

[edit]

References

[edit]
  1. 1 2 Trmal, Céline; Dupray, Sébastien; Heineke, Daan; McConnell, Kirsty (2009). "USING ROCK IN HYDRAULIC ENGINEERING – NEW GUIDANCE AN UPDATED VERSION OF THE MANUAL ON THE USE OF ROCK IN HYDRAULIC ENGINEERING". Coastal Structures 2007. Venice, Italy: World Scientific Publishing Company: 220–224. doi:10.1142/9789814282024_0020. ISBN 978-981-4280-99-0.{{cite journal}}: CS1 maint: periodical has ISBN (link)
  2. 1 2 Breakwaters, coastal structures and coastlines : proceedings of the international conference organized by the Institution of Civil Engineers and held in London, UK on 26-28 September 2001. Allsop, N. W. H., Institution of Civil Engineers (Great Britain). London: T. Telford. 2002. ISBN 0-7277-3042-8. OCLC 51483089.{{cite book}}: CS1 maint: others (link)
  3. 1 2 3 "What is Riprap | Muse Hauling & Grading". www.musehg.com. Retrieved 2020-12-07.
  4. ↑ Aguilera, Moisés A.; Arias, René M.; Manzur, Tatiana (2019). "Mapping microhabitat thermal patterns in artificial breakwaters: Alteration of intertidal biodiversity by higher rock temperature". Ecology and Evolution. 9 (22): 12915–12927. Bibcode:2019EcoEv...912915A. doi:10.1002/ece3.5776. ISSN 2045-7758. PMC 6875675. PMID 31788225.
  5. ↑ "Erosion Control Blankets vs. Rip Rap | East Coast Erosion". East Coast Erosion Control. 2020-05-22. Retrieved 2020-12-06.
  6. ↑ Brown, Scott A. (January 1989). "Welcome to ROSA P |". rosap.ntl.bts.gov. Retrieved 2020-12-06.
  7. ↑ https://www.fhwa.dot.gov/engineering/hydraulics/pubs/hec/hec11sI.pdf
  8. ↑ https://www.usbr.gov/tsc/techreferences/mands/mands-pdfs/RockRampDesignGuidelines_08-2019_508.pdf
  9. ↑ Desai, Suresh (2026-09-06). "Rip Rap Rock Calculator | Tons, Yards & Cost". Material Calculations. Retrieved 2026-09-08.
  10. ↑ Qi; et al. (June 2021). "Scour at pile groups and effects of riprap gradation and thickness on the scour reduction". Journal of Hydraulic Engineering. 52 (6) – via ResearchGate.
  11. 1 2 3 Reid, David; Church, Michael (2015). "Geomorphic and Ecological Consequences of Riprap Placement in River Systems". JAWRA Journal of the American Water Resources Association. 51 (4): 1043–1059. Bibcode:2015JAWRA..51.1043R. doi:10.1111/jawr.12279. S2CID 129730847.
  12. ↑ Sfeir; et al. (August 2021). "RIPRAP FILTERS AND STABILITY OF RIPRAP COVERED SLOPES". Riprap for Scour Countermeasures – via ResearchGate.
  13. ↑ Shields; et al. (June 1995). "Experiment in Stream Restoration". Journal of Hydraulic Engineering. 121 (6): 494–502. Bibcode:1995JHydE.121..494S. doi:10.1061/(ASCE)0733-9429(1995)121:6(494) – via ASCE Library.
  14. ↑ Chhor, Auston D.; Glassman, Daniel M.; Smol, John P.; Vermaire, Jesse C.; Cooke, Steven J. (2020). "Ecological consequences of shoreline armoring on littoral fish and benthic macroinvertebrate communities in an Eastern Ontario lake". Aquatic Sciences. 82 (4): 73. Bibcode:2020AqSci..82...73C. doi:10.1007/s00027-020-00740-0. ISSN 1015-1621. S2CID 220857360.
  15. ↑ Fischenich, J. Craig (April 2003). "Effects of Riprap on Riverine and Riparian Ecosystems" (PDF). Wetlands Regulatory Assistance Program. Archived (PDF) from the original on June 1, 2022 – via US Army Corps of Engineers.
[edit]
Retrieved from "https://en.wikipedia.org/w/index.php?title=Riprap&oldid=1373901646"