Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a2478241cc9ff485

Jump to content

// Workers AI · dad joke modeWhat did the trial pit say? I'm in a hole lot of trouble.

From Wikipedia, the free encyclopedia
Symbol used in drawings

A trial pit (or test pit) is an excavation of ground in order to study or sample the composition and structure of the subsurface, usually dug during a site investigation, a soil survey or a geological survey.[1] Trial pits are dug before the construction. They are dug to determine the geology and the water table of that site.

Trial pits are usually between 1 and 4 metres deep, and are dug either by hand or using a mechanical digger. Building and construction regulations clearly state that any trial pits that concede deeper than 1.2 metres should be secured against structural collapse, if they are to be entered by people.

References

[edit]
  1. Look, Burt (2007). Handbook of geotechnical investigation and design tables. BALKEMA - proceedings and monographs in Engineering, Water and Earth Sciences. Boca Raton, Fla.: Taylor & Francis. ISBN 978-0-415-43038-8.