// Workers AI · dad joke modeWhat did the Design 1075 ship say? "I'm anchored to my style.
.jpg) Design 1075 ship SS Bushong on a Congressional party trip, circa 1919 | |
| Class overview | |
|---|---|
| Name | EFC Design 1075 |
| Builders | G. M. Standifer Construction Corporation, Vancouver, Washington |
| Built | 1919 (USSB) |
| Planned | 16 |
| Completed | 6 |
| Canceled | 10 |
| General characteristics | |
| Type | Cargo ship |
| Tonnage | |
| Length | |
| Beam | 45.6 ft (13.9 m) |
| Draft | 23.25 ft (7.09 m) |
| Depth | 26.0 ft (7.9 m) |
| Installed power |
|
| Propulsion | Single screw |
| Speed | 8 knots (15 km/h; 9.2 mph) |
| Crew | 44 |
The Design 1075 ship (full name Emergency Fleet Corporation Design 1075) was a wood-hulled cargo ship design approved for production by the United States Shipping Board's Emergency Fleet Corporation (EFC) in World War I. The ships were referred to as a "modified Ballin type", as all were a modified version of the Design 1011 ship designed by naval architect Fred A. Ballin. They were built by the G. M. Standifer Construction Corporation in Vancouver, Washington.[1][2]
Background
[edit].jpg)
The Design 1075 ships used the same construction technique as Ballin's Design 1011 ships: to add strength, the wooden hull frames were covered with a skin of double-diagonal wooden planks and the hull's upper edge was reinforced with steel plates.[3] Each Design 1075 ship measured 307.0 feet (93.6 m) in overall length, 295.4 feet (90.0 m) in length between perpendiculars, 45.6 feet (13.9 m) in beam, and 26.0 feet (7.9 m) in hull depth, with a load draft of 23.25 feet (7.09 m).[1] Tonnage was 2,848 gross register tons (GRT)[4] and 4,326 long tons deadweight (DWT).[1] Propulsion was provided by a triple-expansion steam engine of 1,400 indicated horsepower (1,000 kW), fed by two coal-fired water-tube boilers; this engine drove a single screw, giving a speed of 8 knots (15 km/h; 9.2 mph).[1] The crew complement was 44.[4]
Of the twelve ships ordered from G. M. Standifer, only six were completed; these were delivered to the EFC in 1919. Four other ships were ordered from the Kiernan & Kern Shipbuilding Company in Portland, Oregon but were canceled after the end of the war.[1][2]
References
[edit]- 1 2 3 4 5 Roberts, Stephen S. "EFC Design 1075 (Modified Ballin type): Notes & Illustrations". Shipscribe. Retrieved 7 May 2026.
- 1 2 McKellar, Norman L. "American Wooden Shipbuilding in World War One" (PDF). American Wooden Shipbuilding in World War One, 1917-1921. Shipscribe. Retrieved 7 May 2026.
- ↑ Roberts, Stephen S. "EFC Design 1011 (Ballin type): Notes & Illustrations". Shipscribe. Retrieved 7 May 2026.
- 1 2 Fifty-First Annual List of Merchant Vessels of the United States. Department of Commerce – Bureau of Navigation. 1919. p. 80. See entry for Bushong.