Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a21dea105ee4cf84

Jump to content

// Workers AI · dad joke modeWhat did Com-Pac Legacy say to its friend? You're a compact companion.

From Wikipedia, the free encyclopedia

Com-Pac Legacy
Development
LocationUnited States
Year2006
BuilderCom-Pac Yachts
RoleCruiser
NameCom-Pac Legacy
Boat
Displacement1,000 lb (454 kg)
Draft3.51 ft (1.07 m) with centerboard down
Hull
Typemonohull
Constructionfiberglass
LOA16.50 ft (5.03 m)
LWL14.25 ft (4.34 m)
Beam6.00 ft (1.83 m)
Engine typeoutboard motor
Hull appendages
Keel/board typekeel with centerboard
Ballast400 lb (181 kg)
Ruddertransom-mounted rudder
Rig
Rig typeBermuda rig
Sails
Sailplanfractional rigged sloop
Total sail area130 sq ft (12 m2)

The Com-Pac Legacy, also called the Com-Pac Legacy 17, is an American trailerable sailboat that was designed as a pocket cruiser and first built in 2006.[1][2]

The Com-Pac Legacy is a development of the 1972 Com-Pac 16.[1][2][3]

Production

[edit]

The design was built by Com-Pac Yachts in the United States, starting in 2006.[1][2][4]

Design

[edit]

The Com-Pac Legacy is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop rig; a plumb stem; a reverse transom that slopes to a plumb transom; a transom-hung, kick-up rudder controlled by a tiller and a fixed stub keel, with a centerboard. It displaces 1,000 lb (454 kg) and carries 400 lb (181 kg) of lead ballast.[1][2]

The design incorporates a folding boom and mast that allows the mainsheet to be unhooked, the boom to be folded up against the mast and then the mast pivoted aft to lay on a transom-mounted crutch, making launching and recovery from the trailer easier.[2]

The boat has a draft of 3.51 ft (1.07 m) with the centerboard extended and 1.35 ft (0.41 m) with it retracted, allowing ground transportation on a trailer.[1][2]

The boat is normally fitted with a small 2 to 4 hp (1 to 3 kW) outboard motor for docking and maneuvering.[1][2]

The design has sitting or sleeping accommodation for two people below decks. The head is a portable type. Cabin headroom is 39 in (99 cm).[1][2]

The design has a hull speed of 5.1 kn (9.4 km/h).[2]

Operational history

[edit]

In a 2010 review Steve Henkel wrote, "the Com-Pac Legacy 17 is the successor to the Com-Pac 16, the first sailboat the Hutchins Company built, back in 1975, The new ... boat has gained three inches on the waterline compared to her older sister, adding a theoretical half a knot to her maximum speed. She is also 100 pounds lighter, with 50 of those coming out her [of] lead ballast. Most other dimensions remain the same as the original Com-Pac 16 ... While sailing, a slightly taller rig should make her faster in light air compared to her older sister. Worst features: Compared with her comp[etitor]s, relatively low headroom and narrow beam somewhat restrict cabin space."[2]

See also

[edit]

Related development

References

[edit]
  1. 1 2 3 4 5 6 7 McArthur, Bruce (2020). "Com-Pac Legacy sailboat". sailboatdata.com. Retrieved 30 January 2021.{{cite web}}: CS1 maint: deprecated archival service (link)
  2. 1 2 3 4 5 6 7 8 9 10 Henkel, Steve: The Sailor's Book of Small Cruising Sailboats, page 69. International Marine/McGraw-Hill, 2010. ISBN 978-0-07-163652-0
  3. McArthur, Bruce (2020). "Com-Pac 16 sailboat". sailboatdata.com. Retrieved 30 January 2021.{{cite web}}: CS1 maint: deprecated archival service (link)
  4. McArthur, Bruce (2020). "Com-Pac Yachts/Hutchins Co". sailboatdata.com. Retrieved 30 January 2021.{{cite web}}: CS1 maint: deprecated archival service (link)
[edit]