Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a4157e76dd01c6fa

Jump to content

// Workers AI · dad joke modeWhat did Sprinto say to its friend? You're a quick connection.

From Wikipedia, the free encyclopedia

Sprinto
Development
DesignerJoubert Nivelt Design
LocationFrance
Year2000
BuilderArchambault Boats
Roleracer
Boat
Displacement1,323 lb (600 kg)
Draft5.25 ft (1.60 m)
Hull
Typemonohull
Constructionfibreglass
LOA21.65 ft (6.60 m)
LWL21.49 ft (6.55 m)
Beam7.51 ft (2.29 m)
Engineoutboard motor
Hull appendages
Keelswing keel
Ballast441 lb (200 kg)
Ruddertransom-mounted rudder
Rig
Rig typeBermuda rig
I foretriangle height
21.88 ft (6.67 m)
J foretriangle base
5.91 ft (1.80 m)
P mainsail luff
26.64 ft (8.12 m)
E mainsail foot
10.37 ft (3.16 m)
Sails
Sailplanfractional rigged sloop
Mainsail area138.13 sq ft (12.833 m2)
Jib/genoa area
64.66 sq ft (6.007 m2)
Upwind sail area
202.78 sq ft (18.839 m2)

The Sprinto is a French sailboat that was designed by Joubert Nivelt Design as a racer and first built in 2000.[1][2][3]

Production

[edit]

The design was built by Archambault Boats of Dangé-Saint-Romain, France, starting in 2000, but it is now out of production. Archambault, which had been founded in 1967, went out of business in 2015.[1][3][4]

The design was changed through its production run, incorporating design changes over time.[1][3]

Design

[edit]

The Sprinto is a recreational keelboat, built predominantly of fibreglass. It has a fractional sloop rig with aluminum spars, a deck-stepped mast, wire standing rigging and a single set of swept spreaders. The hull has a plumb stem, a sharply reverse transom, a transom-hung rudder controlled by a tiller and a swing keel. Later models had a drop keel and a revised sailplan layout. It mounts a retractable bowsprit, displaces 1,323 lb (600 kg) and carries 441 lb (200 kg) of ballast.[1][3]

The boat has a draft of 5.25 ft (1.60 m) with the swing keel extended and 0.66 ft (0.20 m) with it retracted, allowing beaching or ground transportation on a trailer.[1][3]

The boat is normally fitted with a small outboard motor for docking and manoeuvring.[1][3]

For sailing downwind the design may be equipped with an asymmetrical spinnaker. It has a hull speed of 6.2 kn (11.5 km/h).[3]

References

[edit]
  1. 1 2 3 4 5 6 McArthur, Bruce (2020). "Sprinto (SK) sailboat". sailboatdata.com. Retrieved 28 December 2020.{{cite web}}: CS1 maint: deprecated archival service (link)
  2. ↑ McArthur, Bruce (2020). "Joubert-Nivelt". sailboatdata.com. Retrieved 28 December 2020.{{cite web}}: CS1 maint: deprecated archival service (link)
  3. 1 2 3 4 5 6 7 Sea Time Tech, LLC (2022). "Sprinto (SK)". sailboat.guide. Retrieved 15 April 2022.{{cite web}}: CS1 maint: deprecated archival service (link)
  4. ↑ McArthur, Bruce (2020). "Archambault Boats (FRA) 1967 - 2014". sailboatdata.com. Retrieved 28 December 2020.{{cite web}}: CS1 maint: deprecated archival service (link)
[edit]
  • Wikimedia Commons logo Media related to Sprinto at Wikimedia Commons