Template:Chembox CalcTemperatures

Template documentationview edit history purge

This template is used on approximately 7,600 pages and changes may be widely noticed. Test changes in the template's /sandbox or /testcases subpages, or in your own user subpage. Consider discussing changes on the talk page before implementing them.

Values for Melting point, Boiling point (properties) and Flash point, Autoignition temperature (hazards) can convert temperatures into the set of °C, °F and K. They also can produce a temperature range, like 10 to 20 °C (50 to 68 °F; 283 to 293 K). Also, unformatted texts can be entered.

Usage

Four or less parameters are needed to present temperature data:

`\|MeltingPt=Decomposes when >` `\|MeltingPtC=50` `\|MeltingPt_ref=<ref>[www.example.com]</ref>` `\|MeltingPt_notes=My notes<ref>[www.chemspider.com]</ref>`	Decomposes when >_50 °C (122 °F; 323 K)^[1]_My notes^[2]
The options for conversion: `\|MeltingPtC=50` `\|MeltingPtF=50` `\|MeltingPtK=50` Temperature range: `\|MeltingPtC=50 to 70` `\|MeltingPtF=50 to 70` `\|MeltingPtK=50 to 70`	50 °C (122 °F; 323 K) 10 °C; 50 °F; 283 K −223.2 °C; −369.7 °F; 50.0 K 50 to 70 °C (122 to 158 °F; 323 to 343 K) 10 to 21 °C; 50 to 70 °F; 283 to 294 K −223.2 to −203.2 °C; −369.7 to −333.7 °F; 50.0 to 70.0 K

| Section = {{Chembox Properties <!-- {{Chembox Properties}} - all temperature parameters -->
| MeltingPt = <!-- Any text for [[melting point]] value -->
| MeltingPtC = <!-- Temperature, number only. Can be a range: '100 to 200' -->
| MeltingPtF = <!-- number, when in degrees Fahrenheit -->
| MeltingPtK = <!-- number, when in kelvins -->
| MeltingPt_ref = <!-- References (always shows, right after calculations or 'any text') -->
| MeltingPt_notes = <!-- Notes (always shows last; can include references) -->

| BoilingPt = <!-- Any text for [[boiling point]] value -->
| BoilingPtC = <!-- Temperature, number only. Can be a range: '100 to 200' -->
| BoilingPtF = <!-- number, when in degrees Fahrenheit -->
| BoilingPtK = <!-- number, when in kelvins -->
| BoilingPt_ref = <!-- References (always shows, right after calculations or 'any text') -->
| BoilingPt_notes = <!-- Notes (always shows last; can include references) -->
  }}

| Section = {{Chembox Hazards <!-- {{Chembox Hazards}} - all temperature parameters -->
| FlashPt = <!-- Any text for [[Flash point]] value. -->
| FlashPtC = <!-- Temperature, number only. Can be a range: '100 to 200' -->
| FlashPtF = <!-- number, when in degrees Fahrenheit -->
| FlashPtK = <!-- number, when in kelvins -->
| FlashPt_ref = <!-- References (always shows, right after calculations or 'any text') -->
| FlashPt_notes = <!-- Notes (always shows last; can include references) -->

| AutoignitionPt = <!-- Any text for [[autoignition temperature]] value -->
| AutoignitionPtC = <!-- Temperature, number only. Can be a range: '100 to 200' -->
| AutoignitionPtF = <!-- number, when in degrees Fahrenheit -->
| AutoignitionPtK = <!-- number, when in kelvins -->
| AutoignitionPt_ref = <!-- References (always shows, right after calculations or 'any text') -->
| AutoignitionPt_notes = <!-- Notes (always shows last; can include references) -->
  }}

Usage

See also