Template:Infobox military operation
(Redirected from Template:Infobox operational plan)
 | This template uses Lua: |
This infobox may be used to describe a particular planned or executed military operation or attack. For operations that resulted in combat, it can be used as an auxiliary template to the {{infobox military conflict}}, if necessary; for other types of operations, including those that were planned but never executed, it may be used alone. In the case of conflicts that consisted of multiple independent operations, multiple copies of the box may be used on a single article.
Usage
| {{{title}}} | |
|---|---|
| Part of {{{part_of}}} | |
| [[File:{{{image}}}|{{{image_size}}}|alt={{{alt}}}|upright={{{image_upright}}}]] {{{caption}}} | |
Operational scope | {{{scope}}} |
| Type | {{{type}}} |
| Location | {{{location}}} 0°N 0°E / 0°N 0°E |
| Planned | {{{planned}}} |
| Planned by | {{{planned_by}}} |
| Commanded by | {{{commanded_by}}} |
| Target | {{{target}}} |
| Objective | {{{objective}}} |
| Date | {{{date}}} {{{time}}} {{{time_begin}}} – {{{time_end}}} ({{{timezone}}}) |
| Executed by | {{{executed_by}}} |
| Outcome | {{{outcome}}} |
| Casualties | {{{casualties}}} {{{fatalities}}} killed {{{injuries}}} injured |
.svg)  {{{pushpin_label}}} {{{pushpin_caption}}} | |
{{Infobox military operation
|name =
|part_of =
|subtitle =
|image =
|image_upright =
|alt =
|caption =
|scope =
|type =
|location =
|location2 = <!-- 2 through 10 for more locations -->
|coordinates =
|coordinates2 = <!-- 2 through 10 for more locations -->
|pushpin_map =
|pushpin_map_size =
|pushpin_caption =
|pushpin_label =
|pushpin_label2 = <!-- 2 through 10 for more locations -->
|planned =
|planned_by =
|commanded_by =
|objective =
|target =
|date = <!-- {{start date|YYYY|MM|DD|df=y}} -->
|time =
|time_begin =
|time_end =
|timezone =
|executed_by =
|outcome =
|casualties =
|fatalities =
|injuries =
|losses =
}}
Example
| Case Blue | |
|---|---|
Operational scope | Strategic offensive |
| Planned by | Wehrmacht |
| Objective | Capture of Caucasus oil fields |
| Date | Began 28 June 1942 |
| Executed by | Army Group South |
{{Infobox military operation
|name = Case Blue
|scope = Strategic offensive
|planned_by = ''[[Wehrmacht]]''
|objective = Capture of [[Caucasus]] oil fields
|date = Began {{start date|1942|06|28|df=y}}
|executed_by = [[Army Group South]]
}}
Parameters
Note: When using parameters, avoid the ambiguous abbreviation "N/A", and instead use "unknown" or "none". All subjective or qualitative judgements and numerical quantities or statistics must be cited to a reliable source (see WP:MILMOS#CITE).
- name – the name of the operational plan; names in multiple languages may be provided.
- subtitle – alternative name of the conflict being described.
- part_of – optional – the larger conflict containing the event described in the article.
- image – optional – an image for the warbox. Given in the form
File:Example.jpg - image_upright – optional – image upright scaling factor.
- alt – optional – Alternative text for image that is accessible to screen readers to help the visually impaired
- caption – optional – the text to be placed below the image.
- location – optional – the location of the operation.
- losses - optional - non-human losses during the operation, such as equipment or vehicles
- coordinates – optional – the coordinates for the location above, given as {{coord}} with |display=inline,title. Used to display the geographic location of the conflict and the location on a map added with the
pushpin_mapparameter. If coordinates for several locations are given, consider if hany shall have the title display. - pushpin_map – optional – the base map to be used for the location map, e.g. "Scotland"; see {{location map}} for more details.
- pushpin_map_size – optional – width of the location map in pixels (px), e.g. "150"; defaults to: "220".
- pushpin_caption – optional – caption displayed below the location map; defaults to "Location within {{{pushpin_map}}}", e.g. "Location within Scotland".
- pushpin_label – optional – the label placed next to the marker on the location map.
- scope – optional – the scope of the operation, such as "Strategic", "Operational", or "Tactical".
- type – optional – as an alternative to the scope field above, the type of operation, such as "Suicide attack" or "Ambush".
- planned – optional – the date(s) on which the plan was developed.
- planned_by – optional – the person or group responsible for developing the plan.
- commanded_by – optional – the person commanding the operation.
- objective – optional – the objective(s) of the operation.
- target – optional – as an alternative to the objective field above, the target(s) of the operation.
- date – optional – the date(s), if any, on which the operation was executed. use {{Start date}} (and {{End date}} if required)
- time – optional – the time, if any, at which the operation was executed.
- time_begin and time_end – optional – as an alternative to the time field above, the start and end times, respectively.
- timezone – optional – the timezone of the location of the operation; UTC+X, UTC-X, or UTC (i.e. offset from UTC) is preferred.
- executed_by – optional – the people, groups, units, or formations responsible for executing the operation.
- outcome – optional – the outcome of the operation from the perspective of the planners with a very brief summary of defence if appropriate.
- casualties – optional – any casualties occurring during the execution of the operation.
- fatalities – optional – as an alternative to the casualties field above, the number of fatalities occurring during the execution of the operation.
- injuries – optional – as an alternative to the casualties field above, the number of injuries occurring during the execution of the operation.
Pushpin map
Below are the parameters used by Module:Location map to produce the pushpin map in this Infobox. These parameters are available for editors to set in articles that use this infobox.
| Parameter | Description | Default |
|---|---|---|
|pushpin_map= |
The map(s) to display. For example, specifying England will use the values for England in Module:Location map/data/England.Multiple maps can be shown by providing a list of map names separated by #. For multiple maps, the first is shown by default. A reader can select the others with radio buttons. |
N/A |
|pushpin_caption= |
The text of a caption to be displayed below the map. If not provided a default caption will be generated. Multiple captions can be shown when separated by ## (that's two). |
Location within MAPNAME |
|pushpin_relief= |
0/false/off will cause the template to display the map defined as image (generally not a relief map). 1/true/on will cause the template to display the map defined as image1 (generally a relief map). Any non-zero numeric value such as 2 or 3 will display image2 or image3, if those images are defined. Any other non-empty value will cause display of image1. See the example at Location map+/relief. |
0 |
|pushpin_label= |
The text of the label to display next to the identifying mark; a wikilink can be used. You can enclose the label inside of {{nowrap}} if you want to make sure that it stays on a single line. | N/A |
|pushpin_label_size= |
The font size to use for the label, given as a percentage of the normal font size (<100=smaller, >100=larger); the default size is 90. Do not include %. For example, use |pushpin_label_size=80, not |pushpin_label_size=80%. If set to 0, the label is only displayed when the user hovers over the mark. |
90 |
|pushpin_label_position= |
The position of the label relative to the identifying mark; valid values are left, right, top, bottom and none. This defaults to either left or right, depending on the coordinates of the marker and its position relative to the right border of the map image. When |pushpin_label_position=none, any defined label will not be displayed with the mark, but it will be used to create the default caption. |
N/A |
|pushpin_mark= |
The name of an image file to display as the identifying mark; the default is Red pog.svg  . See examples at Commons:Location markers and Commons:Category:Map icons. |
Red pog.svg |
|pushpin_mark_size= |
The size of the identifying mark in pixels. Do not include px | 8 |
|pushpin_alt= |
Alt text for map; used by screen readers. See WP:ALT. | N/A |
|pushpin_background= |
The background color to use for the label; see Web colors. The default is no background color, which shows the map image behind the label. | N/A |
|pushpin_map_size= |
Determines the width of the map in pixels, overriding any default values; do not include px. | N/A |
Tracking categories
TemplateData
|
See a monthly parameter usage report for Template:Infobox military operation in articles based on its TemplateData.
TemplateData for Infobox military operation This infobox may be used to describe a particular planned or executed military operation or attack.
| ||||||||||