Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

Jump to content

StorageTek SL8500

From Wikipedia, the free encyclopedia
(Redirected from SL8500)
A HBT controller module for StorageTek SL8500.
The HBT card translates commands from the HBC controller card into unique drive commands, transferred across differential RS-422 lines. The HBT card contain 66 UARTs; 64 are responsible for the parallel-to-serial conversion for the tape drives and the remaining two communicate with the tape environmental monitor card (HBD card).[1]

StorageTek SL8500 is an enterprise-class robotic tape library, originally marketed by Sun Microsystems and later by Oracle Corporation following their acquisition of Sun in 2010.

Each library module starts with a capacity of 1448 tape cartridges, and expands in 1728 cartridge increments to a maximum capacity of 10088.[2] It supports up to 64 tape drives and 4 or 8 independent robots in each library.[3] Each tape drive installed in the SL8500 library has an independent data path. The aggregate data rate for all drives reaches 58 TB/hour per module using T10000D drives, more with compression.

Up to ten such modules can be connected side-by-side and automatically pass tapes between each other, forming a complex capable of storing over 925 PB of data and mounting 640 tape drives.

References

[edit]
  1. SL8500 User’s Guid, page 12
  2. Sun Microsystems. "StorageTek StreamLine™ SL8500 - modular library system" (PDF). Retrieved 3 May 2021.
  3. Oracle. "Oracle's StorageTek SL8500 modular library system - Technical Specifications" (PDF). Retrieved 5 December 2017.
[edit]