Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a221e2afdf2cb86e

Jump to content

Winterbrook Bridge

Winterbrook Bridge
Winterbrook Bridge from upstream
Coordinates51°35′18.5″N 1°07′24.5″W / 51.588472°N 1.123472°W / 51.588472; -1.123472
CarriesA4130 road
CrossesRiver Thames
LocaleWallingford
Maintained byOxfordshire County Council
Characteristics
MaterialConcrete and steel
Total length55 metres (180 ft)
Height15 feet 9 inches (4.80 m)[1]
No. of spans3
History
Opened1993
Location
Map
Interactive map of Winterbrook Bridge
Winterbrook Bridge from the side

Winterbrook Bridge, also known as Wallingford Bypass Bridge, was built in 1993 as part of a bypass around Wallingford, Oxfordshire, to relieve congestion on the single-lane Wallingford Bridge. It forms part of the A4130, connecting Winterbrook, at the north end of Cholsey, just south of Wallingford, on the west bank, to Mongewell on the east bank. The bridge crosses the Thames on the reach between Cleeve Lock and Benson Lock. The 55-metre (180 ft) three-span bridge is built of steel plate girders with a reinforced concrete deck slab and glass fibre reinforced plastic cladding on the underside.[2]

During construction, remains of a late Bronze Age settlement on a former eyot were discovered and investigated on the west bank of the Thames.[3] The bridge was designed to avoid disturbing the archaeological site. Near the east bank, close to Mongewell, construction work allowed examination of the South Oxfordshire Grim's Ditch, a long earthwork followed by the Ridgeway Path, and revealed it from the late Iron Age/early Roman.

See also

[edit]

Notes

[edit]
  1. River Thames Alliance. Bridge heights on the River Thames.
  2. Peshkam & Banks, 1996
  3. Cromarty et al. (2005)

References

[edit]
  • Cromarty, A.M., Barclay, A., Lambrick, G. and Robinson, M. (2005) Archaeology of the Wallingford Bypass, 1986-92: Late Bronze Age Ritual and Habitation on a Thames Eyot at Whitecross Farm, Wallingford, Oxford : Oxbow Books, ISBN 0-947816-67-4
  • McKenzie, M. (1997) The Corrosivity of the Environment Inside Oxfordshire County Council Bridge Enclosures, unpubl. Project Report PR/CE/67/97, TRL, Crowthorne, UK
  • Peshkam, V. and Banks, W.M. (1996) "Design, analysis and testing of Winterbrook Bridge composite enclosure", in: Saadatmanesh, H., Ehsani, E.R. and Ehsani, M.R. (Eds), First International Conference on Composites in Infrastructure, University of Arizona, Tucson, p. 929943
  • Ryall, M.J. (2001) Bridge Management, Butterworth-Heinemann, ISBN 0-7506-5077-X, p. 294
[edit]