Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a24ed9713a2d1ec6

Jump to content

// Workers AI · dad joke modeWhy did Utah State Route 260 go to therapy? It had a lot of turns to work through.

Route map:
From Wikipedia, the free encyclopedia

State Route 260 marker
State Route 260
Map
Route information
Maintained by UDOT
Length4.179 mi[1] (6.725 km)
Existed1992 as SR-170; renumbered 1993–present
Major junctions
South end SR-24 south of Aurora
North end US 50 north of Aurora
Location
CountryUnited States
StateUtah
Highway system
  • Utah State Highway System
SR-259 SR-261

State Route 260 is a highway within Sevier County in central Utah that connects SR-24 to US-50 while passing through the town of Aurora in a span of four miles (6 km).

Route description

[edit]

From its southern terminus at SR-24, the route goes northeast until entering Aurora, where it turns north. It continues this general direction until reaching the northern terminus of US-50.

History

[edit]

The state legislature designated State Route 256 in 1955, running south from SR-63 (now US-50) west of Salina through Aurora to SR-11 (US-89, now SR-24).[2] The route was removed from the state highway system in 1969,[3] but the Utah Transportation Commission restored it in 1992, soon after I-70 was completed in the area. At one of the meetings relating to disposition of the former alignment of US-89, Sevier County proposed that the state take over the road, used locally as a shortcut to reach I-15 via US-50. Early plans had it becoming part of SR-24, with the present SR-24 to Salina (old US-89) being given to the county, but this did not happen, and a new designation - State Route 170 - was used for the connection.[4] About 1.5 years later, in October 1993, the commission realized that placing SR-170 and I-70 in close proximity might cause confusion, and changed the number to SR-260.[5][6]

Major intersections

[edit]

The entire route is in Sevier County.

Locationmi[7]kmDestinationsNotes
0.0000.000 SR-24 Sigurd, Salina, LoaSouthern terminus
4.1796.725 US 50 Salina, ScipioNorthern terminus
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

References

[edit]
KML is not from Wikidata
  1. "State Route 260 Highway reference". Utah Department of Transportation.
  2. Utah State Legislature (1955). "Chapter 44: State Roads". Session Laws of Utah. Route 256. From route 63 approximately 3.5 miles west of Salina southerly via Aurora to route 11.
  3. Utah Department of Transportation, Highway Resolutions Archived September 30, 2008, at the Wayback Machine: "Route 256". Archived from the original on September 22, 2008. Retrieved June 27, 2008. (2.37 MB), updated November 2007, accessed May 2008
  4. Utah Department of Transportation, Highway Resolutions Archived September 30, 2008, at the Wayback Machine: "Route 118". (5.66 MB), updated November 2007, accessed May 2008
  5. Utah Department of Transportation, Highway Resolutions Archived September 30, 2008, at the Wayback Machine: "Route 170". Archived from the original on September 22, 2008. Retrieved June 27, 2008. (833 KB), updated November 2007, accessed May 2008
  6. Utah Department of Transportation, Highway Resolutions Archived September 30, 2008, at the Wayback Machine: "Route 260". (3.12 MB), updated November 2007, accessed May 2008
  7. "State Highway Map". Utah Department of Transportation. Archived from the original on November 6, 2018. Retrieved April 23, 2008.