Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a21fec6bccf6ea0a

Jump to content

// Workers AI · dad joke modeWhat did UConn Lumpy say? I'm a little husky.

From Wikipedia, the free encyclopedia

Lumpy
The Lumpy airship at the UConn Storrs campus, 1975
General information
TypeAirship
National originUnited States of America
ManufacturerUniversity of Connecticut
Statusretired
Number built1
History
First flight1975

The UConn Lumpy was a blimp designed, built, and flown by students at the University of Connecticut in 1975.

Design and development

[edit]

The airship was built by five University of Connecticut engineering students as part of their Engineering Design Project class at the university, with Associate Professor Kurt Marshke acting as their faculty advisor. As part of the process, the students built a 9.2 ft (2.8 m) proof-of-concept model, to vet the design and the control mechanisms.[1][2]

The gondola was made from aluminum tubing, with the pilot located near the front and the engine sited towards the rear. The envelope was sewn together using green surplus government issue parachutes, and contained three 25 ft (7.6 m) diameter weather balloons filled with helium. The ill-fitting appearance of the envelope led to the craft being named Lumpy. The airship was powered by a 15 hp (11 kW) snowmobile engine, that had been salvaged from an earlier student project.[2][3] The craft was fitted with an elevator, but not a rudder.

Operational history

[edit]

The Lumpy flew on Saturday, 24 May 1975 at the university's Storrs campus' soccer field.[4] To abide by FAA regulations, a 500 ft (150 m) tether was attached to the airship.[1] Student Robert S. Meshako acted as pilot for the initial trials, with the other students later having turns at the controls.[4] The airship reached a maximum altitude of 100 ft (30 m).

Specifications

[edit]

Data from The Hartford Courant[2] & Connecticut Daily Campus[1]

General characteristics

  • Crew: 1
  • Length: 16 m (51 ft)
  • Diameter: 7.6 m (25 ft)
  • Volume: 200 m3 (7,000 cu ft) gross
  • Empty weight: 204 kg (450 lb)

Performance

  • Maximum speed: 16 km/h (10 mph, 8.7 kn)

References

[edit]
  1. 1 2 3 "Student project to 'balloon' in May". Connecticut Daily Campus. Storrs-Mansfield, Connecticut. 8 April 1975. p. 1.
  2. 1 2 3 Stepno, Robert B. (6 April 1975). "UConn Students Hope to Put Blimp Aloft". The Hartford Courant. Hartford, Connecticut. p. 24.
  3. Karmel, Terese (24 May 1975). "Storrs Blimp Awaits Calm". The Hartford Courant. Hartford, Connecticut. p. 30.
  4. 1 2 "Bulging Blimp Aloft at UConn". The Hartford Courant. Hartford, Connecticut. 25 May 1975. p. 11C.
[edit]