Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a22f0d518c7224d3

Jump to content

// Workers AI · dad joke modeWhat did the Town Bridge say? "I'm connected to the community.

Town Bridge
Town Bridge is located in Connecticut
Town Bridge
Location within Connecticut
Town Bridge is located in the United States
Town Bridge
Location within the United States
LocationTown Bridge Road over the Farmington River, Canton, Connecticut
Coordinates41°49′28″N 72°55′43″W / 41.82444°N 72.92861°W / 41.82444; -72.92861
Arealess than one acre
Built1895 (1895)
Built byBerlin Iron Bridge Company
Architectural styleParker through truss
NRHP reference No.99000923[1]
Added to NRHPAugust 5, 1999

The Town Bridge is a historic truss bridge, carrying Town Bridge Road over the Farmington River in Canton, Connecticut. Built in 1895, it is one of only two surviving pin-connected Parker truss bridges in the state. It was listed on the National Register of Historic Places in 1999.[1]

Description and history

[edit]

The Town Bridge is located in a rural-residential setting of southwestern Canton, north of the village of Collinsville and about 0.1 miles (0.16 km) west of Connecticut Route 179 on Town Bridge Road. It is a single-span Parker truss, with a total length of about 172 feet (52 m), and a height above the river of about 12.5 feet (3.8 m). It has a metal deck covered in asphalt, and carries a single lane of traffic. Its entrance portals are adorned with iron cresting.[2]

The bridge was built in 1895 for the town by the Berlin Iron Bridge Company, Connecticut's leading manufacturer of iron bridges at the time. The bridge is distinctive for a number of reasons. It is the only surviving Berlin bridge in the state that is not of lenticular truss design, which then predominated in the company's production, and is one of less than two dozen Berlin bridges left in the state (out of more than 100 originally built). It is one of only two Parker trusses with pinned connections, a method of connecting the truss members that gave way to riveted connections (also present on this structure) by about 1900. The bridge was built as part of a town program to improve all of its crossings of the swift-flowing and flood-prone Farmington River.[2]

See also

[edit]

References

[edit]
  1. 1 2 "National Register Information System". National Register of Historic Places. National Park Service. July 9, 2010.
  2. 1 2 "NRHP nomination for Town Bridge". National Park Service. Retrieved November 30, 2017.