Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a2287f53aa19e6b0

Jump to content

// Workers AI · dad joke modeWhat did the Thermally Advantaged Chassis say? "I'm heated about my design.

From Wikipedia, the free encyclopedia

A Thermally Advantaged Chassis (TAC) is a computer enclosure that complies with the Thermally Advantaged Chassis specifications created by Intel. It is capable of maintaining an internal ambient temperature below 38 degrees Celsius when functioning with Intel's Pentium 4 and Celeron D processors based on 90 nm process technology, and an ambient temperature below 39 degrees Celsius when using a Pentium D processor. Intel maintains that using a thermally advantaged chassis is the absolute minimum requirement for using Pentium 4 (Prescott), Pentium D, and Celeron D, processors.

Overview

[edit]

In the 1.1 version, the TAC design is intended to disallow internal temperature rises of more than 3 degrees Celsius, and provide the processor with a cooler environment to work in. Its main feature is a Chassis Air Guide that directs room temperature air directly in the path of the CPU fan and heat sink. The chassis air guide is a passive cooling system, and relies completely on internal system fans to guide the air.

Airflow pattern

[edit]

As with most computers, the rear fan and power supply fan exhaust, moving hot air away from the computer. This causes a slight depressurization inside the chassis, and requires all other openings to become intake vents. Airflow from the front of the chassis moves around the Chassis Air Guide, allowing the processor fan to only draw air from outside the chassis, providing more effective cooling.

System fans

[edit]

The rear chassis exhaust fan is required to be at least 92-mm or larger, providing a minimum of 55 CFM in free air. The processor is required to have an active cooling system, consisting of a fan and heat sink.

Side-panel venting

[edit]

The side-panel is required to have an add-in card vent, which provides room temperature air to the add-in cards. High-performance graphics cards will benefit from the lower temperature air.

[edit]