Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a2246d093a234a3e

Jump to content

Teck cable

From Wikipedia, the free encyclopedia
Teck cables on spools

Teck cable is a type of low voltage armoured cable named for the location where it was first developed and used, Teck Township, now known as Kirkland Lake, Ontario. The mining operations such as those conducted by Teck-Hughes Gold Mining Ltd. required a durable cable to power equipment and withstand the demanding conditions, and teck cable was the engineered result.[1]

In Canada, teck cable is defined by CSA standard C22.2 No. 131[2] and carries the type designation of TECK 90, the 90 referring to the maximum conductor temperature in degrees Celsius that the cable may be used at in a maximum 30 C ambient environment without de-rating its ampacity.

Uses

[edit]
Teck cables in industrial installation

Teck cable is a very versatile power cable because it may be used where subject to limited mechanical damage, it is resistant to water, petrochemicals, and sunlight. It may be used for direct-earth burial and if properly sealed at the connection point, in explosive atmospheres such as gasoline dispensing stations.[3]

When used in industrial environment, it is usually contained in a cable tray with many other cables powering the motors that run the industrial processes.

In the commercial environment, it may also be found in a tray, but is often fastened to a wall, truss, or other part of the building structure. It may be used to power any equipment such as compressors, heaters, or commercial dishwashers, and is also used for power distribution within buildings.

Teck cable may be used to power hot tubs, garages or other outbuildings, and sub-panels in the residential setting.

Construction

[edit]

Teck cable is composed of copper conductors sheathed in cross-linked polyethylene, bundled by plasticized PVC, wrapped in interlocking aluminum armour, all sealed by another coat of PVC.

See also

[edit]

References

[edit]
  1. Canadian Pulp and Paper Industry, Volume 21. University of Minnesota: Maclean-Hunter. 1968. p. 101. Retrieved 18 April 2018.
  2. "C22.2 NO. 131-17 - Type TECK 90 cable". CSA Group. Retrieved 18 April 2018.
  3. Western Miner and Oil Review, Volume 48. Pennsylvania State University. 1975. p. 102. Retrieved 18 April 2018.{{cite book}}: CS1 maint: location missing publisher (link)