Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a21ebbacda2f2877

Jump to content

Red rot

From Wikipedia, the free encyclopedia
Leather bindings exhibiting red rot

Red rot is a degradation process found in vegetable-tanned leather.[1]

Red rot is caused by prolonged storage or exposure to high relative humidity, environmental pollution, and high temperature. In particular, red rot occurs at pH values of 4.2 to 4.5. Sulfur dioxide converts to sulfurous acid which forms hydrogen peroxide. The peroxide combines with residual tannins in the leather to oxidize proteins, creating ammonium sulfate and ammonium bisulfate.[2]

Red rot is also caused by problems in the tanning or in the bookbinding. In the tanning examples are: sulfuric acid residue, use of contaminated water and incomplete tanning. The bookbinding process can cause red rot when acids and bases are used when coloring the leather.[3]

The decay manifests as a characteristic powdering of the leather's surface, along with structural weakness through loss, delamination, and a felt-like consistency.

The damage caused by red rot is irreversible. However, its spread, if caused by environmental factors, may be retarded by an application of a consolidant (such as Klucel G) coated with a sealer (such as Renaissance Wax).[4]

The progress of red rot can be stopped or slowed with a treatment of aluminium alkoxide solution, which increases the pH value and becomes (in the presence of water) a buffering inorganic aluminium salt in the leather.[5]

References

[edit]
  1. Applebaum, Barbara (1991). Guide to Environmental Protection of Collections. Madison, Conn: Sound View Press. p. 185. ISBN 978-0932087164.
  2. Stambolov, Todor (1989). "Environmental influences on the weathering of leather". International Leather and Parchment Symposium. 8: 1–5.
  3. van Soest, H. A. B.; Stambolov, T.; Hallebeek, P. B. (1984). "Conservation of Leather". Studies in Conservation. 29 (1): 21–31. doi:10.2307/1505940. JSTOR 1505940.
  4. Johnson, Anna (2013). "Evaluation of the use of SC6000 in conjunction with Klucel G as a conservation treatment for bookbinding leather: notes on a preliminary study". J. Inst. Conservation. 36 (2): 125–144. doi:10.1080/19455224.2013.815646. S2CID 194080498.
  5. Lama, Anne; Antunes, A. Paula M.; Covington, Anthony D.; Guthrie-Strachan, Jeffry; Fletcher, Yvette (2015). "Use of aluminium alkoxide and oxazolidine II to treat acid-deteriorated historic leather" (PDF). J. Inst. Conservation. 38 (2): 172–187. doi:10.1080/19455224.2015.1071713. S2CID 93393173.