Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a21c99fe4dccecd4

Jump to content

Polydymite

From Wikipedia, the free encyclopedia
Polydymite
General
CategorySulfide mineral
Thiospinel group
Spinel structural group
FormulaNi3S4
IMA symbolPld[1]
Strunz classification2.DA.05
Crystal systemCubic
Crystal classHexoctahedral (m3m)
H-M symbol: (4/m 3 2/m)
Space groupFd3m
Unit cella = 9.48 Å; Z = 8
Identification
ColorPale to steel-gray
Crystal habitAs octahedral crystals, massive, granular to compact
TwinningTwinning on {111}
CleavageIndistinct on {001}
FractureConchoidal to uneven
Mohs scale hardness4.5 – 5.5
LusterMetallic
StreakBlack gray
DiaphaneityOpaque
Specific gravity4.5 – 4.8
Alters toTarnishes to copper-red
References[2][3][4][5]

Polydymite, Ni2+Ni23+S4, is a supergene thiospinel sulfide mineral associated with the weathering of primary pentlandite nickel sulfide.

Polydymite crystallises in the isometric system, with a hardness of 4.5 to 5.5 and a specific gravity of about 4, is dark violet gray to copper-red, often with verdigris and patina from associated copper and arsenic sulfides, and is typically in amorphous to massive infill of lower saprolite ultramafic lithologies.

Polydymite is the nickel equivalent of violarite and in many cases these two minerals are formed together, potentially in solid solution.

Common contaminants of polydymite are cobalt and iron. Polydymite forms a series with linnaeite, Co+2Co+32S4.[6]

Paragenesis

[edit]

Polydymite is formed by oxidisation of primary sulfide assemblages in nickel sulfide mineralisation. The process of formation involves oxidation of Ni2+ and Fe2+ which is contained within the primary pentlandite-pyrrhotite-pyrite assemblage.

Continued oxidation of polydymite leads to replacement by goethite and formation of a gossaniferous boxwork, with nickel tending to remain as impurities within the goethite or hematite, or rarely as carbonate minerals.

Occurrence

[edit]

Polydymite is reported widely from the oxidised regolith above primary nickel sulfide ore systems worldwide. It is less common than related violarite, due to the high iron content of most primary sulfides.

Economic importance

[edit]

Polydymite is an important transitional ore in many nickel sulfide mines, as it has increased nickel tenor (Ni% as a total of sulfide) and occupies a position within the mineralised profile where it must be extracted to pay for development down to the more valuable primary (hypogene) mineralisation.

References

[edit]
  1. Warr, L.N. (2021). "IMA–CNMNC approved mineral symbols". Mineralogical Magazine. 85 (3): 291–320. Bibcode:2021MinM...85..291W. doi:10.1180/mgm.2021.43.
  2. Mineralienatlas
  3. Polydymite on Mindat.org
  4. Polydymite in the Handbook of Mineralogy
  5. Polydymite data on Webmineral
  6. Linnaeite-Polydymite Series