Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a256668b994afa14

Jump to content

Pine Mill Bridge

Pine Mill Bridge
Pine Mill Bridge is located in Iowa
Pine Mill Bridge
Location within Iowa
Pine Mill Bridge is located in the United States
Pine Mill Bridge
Location within the United States
LocationOver Pine Creek in Wildcat Den State Park
Coordinates41°28′3″N 90°52′2″W / 41.46750°N 90.86722°W / 41.46750; -90.86722
Built1878
ArchitectWrought Iron Bridge Company
Architectural stylePratt Truss bridge
MPSHighway Bridges of Iowa MPS
NRHP reference No.98000493[1]
Added to NRHPMay 15, 1998

The Pine Mill Bridge is an historic structure located in Wildcat Den State Park in rural Muscatine County, Iowa, United States. It was built in 1878 near the Pine Creek Gristmill, the only place in Iowa where a mill and bridge combination remains in place. The bridge was listed on the National Register of Historic Places in 1998 as a part of the Highway Bridges of Iowa MPS.[1]

History

[edit]

The citizens of Montpelier Township petitioned the Muscatine County Board of Supervisors in 1877 for a bridge over Pine Creek at the site of the mill where they needed a crossing to transport their crops. For most of the year the creek was easily crossed, but after a heavy rainfall it was turned into a raging stream. Financial considerations delayed the project for a year when the board solicited bids for the construction of the bridge. In September 1878 a contract to manufacture and erect the truss was issued to the Wrought Iron Bridge Company of Canton, Ohio. The bridge was completed by the end of the year. While it was one of numerous bridge and mill combinations across the state of Iowa, it is the only one that remains.[2]

Design

[edit]

The Pine Mill Bridge is a standard pin-connected Pratt through truss bridge offered by the Wrought Iron Bridge Company.[2] The span is composed of seven panels, and is 96 feet (29 m) long. The roadway is 16 feet (5 m) wide.[2]

See also

[edit]

References

[edit]
  1. 1 2 "National Register Information System". National Register of Historic Places. National Park Service. March 13, 2009.
  2. 1 2 3 Pitner, Leslie. "Pine Mill Bridge" (PDF). Historic American Engineering Record. Washington, D.C.: Library of Congress. Retrieved January 24, 2021.
[edit]