Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a22b6b1ffaffefe9

Jump to content

Permanganometry

From Wikipedia, the free encyclopedia

Permanganommetry is one of the techniques used in chemical quantitative analysis. It is a redox titration that involves the use of permanganates to measure the amount of analyte present in unknown chemical samples.[1] It involves two steps, namely the titration of the analyte with potassium permanganate solution and then the standardization of potassium permanganate solution with standard sodium oxalate solution. The titration involves volumetric manipulations to prepare the analyte solutions.[2]

Permanganometry allows the detection and estimation of the quantitative presence of various chemical species, such as iron(II), manganese(II), oxalate, nitrite, and hydrogen peroxide.

Reaction

[edit]

Depending on the conditions in which the titration is performed, the manganese is reduced from an oxidation of +7 to +2, +4, or +6.

In most cases, permanganometry is performed in a very acidic solution in which the following electrochemical reaction occurs:[3]

MnO4 + 8 H+ + 5 e → Mn2+ + 4 H2O; E° = +1.51 V[4]

which shows that KMnO4 (in an acidic medium) is a very strong oxidizing agent, able to oxidize Fe2+ (E°Fe3+/Fe2+ = +0.77 V), Sn2+ (E°Sn4+/Sn2+ = +0.2 V), and even Cl (E°Cl2/Cl = +1.36 V).

In weak acidic medium MnO4 can not accept 5 electrons to form Mn2+. Instead, it accepts only 3 electrons and forms solid MnO2 by the following reaction:

MnO4 + 4 H+ + 3 e → MnO2 + 2 H2O; E° = +1.69 V

In a strongly basic solution, with the concentration c(NaOH) >1 mol dm−3, only one electron is accepted to produce manganate:

MnO4 + eMnO2−4; E° = +0.56 V[5]

References

[edit]
  1. Redox titrations: Permanganometry. In: University Chemistry, Vol. 1. C. Parameshwara Murthy. New Age International, 2008. ISBN 81-224-0742-0. p.632
  2. Louis Rosenfeld. Four Centuries of Clinical Chemistry. CRC Press, 1999, p. 130-175.
  3. Kolthoff, Izaak Maurits (1929). Volumetric Analysis. J. Wiley & Sons, Incorporated.
  4. Table of standard reduction potentials. In: Chemistry and chemical reactivity. John C. Kotz, Paul Treichel, John R. Townsend. Cengage Learning, 2008. ISBN 0-495-38703-7. p. 920
  5. Louis Rosenfeld. Four Centuries of Clinical Chemistry. CRC Press, 1999, p. 72-75.