Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a2629d6b6852dbb4

Jump to content

Organ-pipe scanner

From Wikipedia, the free encyclopedia
AN/TPS-43 with fifteen-horn elevation scanner

An organ-pipe scanner is a system used in some radar systems to provide scanning in azimuth or elevation without moving the antenna. It consists of a series of waveguides and feed horns arranged in front of a shaped reflector, each one positioned to reflect the beam in a different direction. The wave guides meet at a central point where a small rotating waveguide feeds the microwave signal into each of the horns in turn as it rotates past them.

The system was found in a number of 1950s and 60's era radars, notably the US's AN/FPS-50 radar used in the BMEWS network, and the High Speed Aerial of the UK's RX12874 Passive Detection System. The concept fell from use with the increasing use of phased array, which provided a similar steering mechanism in purely electronic form with no moving parts.

A similar concept is the Foster scanner, which is typically found on lower-power systems like counter-battery radars.

References

[edit]
  • "Organ-Pipe Scanner". Radar Tutorial.