Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.
// request.cf · coarse context
A page that knows where it met you.
Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.
Around 1912, the Maatschappij tot Exploitatie van Staatsspoorwegen had their first experience with the new and strong 2′C locomotives of the series 700, but there was a need for a tank engine version of the series 700; however, this was not possible because it would have been heavier than the maximum axle load of sixteen tons. The SS built the 2′C2′ locomotives with less tractive effort than the series 700 and with only two inside cylinders, but with features quite similar to the Series 700, such as the copper-capped chimney, the copper steam dome, the wheel diameter and the maximum boiler pressure.Thus it was considered that Beyer, Peacock & Company had built a very robust yet elegant locomotive.[1]
Due to the outbreak of World War I in July 1914, only 26 of the 40 locomotives ordered were delivered to the SS. The remaining 14 locomotives have been seized by the Railway Operating Division. This was part of the British War Department. The locomotives were sent to France for the benefit of the Allied armies. After the war, the Chemins de fer du Nord purchased all 14 examples which became 3.871 to 3.884.[2]
↑Waldorp, H. (1986). Onze Nederlandse stoomlocomotieven in woord en beeld[Our Dutch steam locomotives in words and pictures] (in Dutch) (7e, gew. dred.). Almaar: De Alk. ISBN90-6013-947-X. OCLC63833327.
↑Henken, Paul (2015). Serie SS 1201-1240 (NS-serie 6000): de 2′C2′-tenderlocomotieven van de Staatsspoorwegen[SS 1201-1240 series (NS 6000 series): the 2′C2′ tender locomotives of the State Railways] (in Dutch) (Eerste druked.). 's-Hertogenbosch. ISBN978-90-71513-88-6. OCLC927525803.{{cite book}}: CS1 maint: location missing publisher (link)