Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a21db7488a304c41

Jump to content

// Workers AI · dad joke modeWhat did multiplexed binary offset carrier say? I'm carrying a lot of bits.

From Wikipedia, the free encyclopedia

Multiplexed binary offset carrier (MBOC) modulation[1][2][3] is a modulation design proposed for Galileo[2] and modernized GPS satellite navigation signals, which combines a sine binary offset carrier SinBOC(1,1) signal with a SinBOC(6,1) signal, either via weighted sum/difference (the CBOC implementation) or via time-multiplexing (the TMBOC implementation).

The main objective of the common GPS and Galileo signal design activity was that the power spectral density (PSD) of the proposed solution would be identical for GPS L1C and Galileo E1 OS signals when the pilot and data components are computed together.[1] This assures high interoperability between both signals. Its power spectral density is defined by[4]

MBOC has two main implementations, the Composite Binary Offset Carrier (CBOC) implementation, currently used in Galileo, and the Time-Multiplexed Binary Offset Carrier (TMBOC), currently used in the modernized GPS L1C signal.

See also

[edit]

References

[edit]
  1. 1 2 Navipedia information on MBCO Modulation
  2. 1 2 Galileo Open Service Signal In Space Interface Control Document (OS SIS ICD) Archived 2014-06-11 at the Wayback Machine, GSA, Issue 1.1, September 2010
  3. Hoult, N.; Aguado, L.E.; Xia, P. (2008). "MBOC and BOC(1,1) Performance Comparison". Journal of Navigation. 61 (4): 613–627. doi:10.1017/S0373463308004918.
  4. Agreement06