Module:Location map/data/Australia Victoria

Module documentationviewedithistorypurge

Location map of Victoria

name	Victoria
border coordinates
	-33.8
	140.6	←↕→	150.3
	-39.3
map center	36.55°S 145.45°E / -36.55; 145.45
image	Australia Victoria location map.svg
image1	Australia Victoria relief location map.jpg
image2	Australia Victoria location map blank.svg
image3	Australia Victoria relief location map blank.png
image4	Australia Victoria location map highways.svg

Map of Victoria, Australia

Module:Location map/data/Australia Victoria is a location map definition used to overlay markers and labels on an equirectangular projection map of Victoria in Australia. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.

Usage

These definitions are used by the following templates when invoked with parameter "Australia Victoria":

• {{Location map|Australia Victoria |...}}
• {{Location map many|Australia Victoria |...}}
• {{Location map+|Australia Victoria |...}}
• {{Location map~|Australia Victoria |...}}

Map definition

• name = Victoria

  Name used in the default map caption

• image = Australia Victoria location map.svg

  The default map image, without "Image:" or "File:"

• image1 = Australia Victoria relief location map.jpg

  An alternative map image, usually a relief map, which can be displayed via the relief or AlternativeMap parameters

• image2 = Australia Victoria location map blank.svg
• image3 = Australia Victoria relief location map blank.png
• image4 = Australia Victoria location map highways.svg

  Alternative map images which can be displayed via the AlternativeMap parameter

• top = -33.8

  Latitude at top edge of map, in decimal degrees

• bottom = -39.3

  Latitude at bottom edge of map, in decimal degrees

• left = 140.6

  Longitude at left edge of map, in decimal degrees

• right = 150.3

  Longitude at right edge of map, in decimal degrees

Alternative map

The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. The maps displayed as image2 / image3 / image4 can be used with the AlternativeMap parameter. Examples may be found below or in the following:

• Template:Location map#Relief parameter
• Template:Location map+/relief
• Template:Location map#AlternativeMap parameter
• Template:Location map+/AlternativeMap

Precision

Longitude: from West to East this map definition covers 9.7 degrees.

• At an image width of 200 pixels, that is 0.0485 degrees per pixel.
• At an image width of 1000 pixels, that is 0.0097 degrees per pixel.

Latitude: from North to South this map definition covers 5.5 degrees.

• At an image height of 200 pixels, that is 0.0275 degrees per pixel.
• At an image height of 1000 pixels, that is 0.0055 degrees per pixel.

Examples using location map templates

Location map, using default map (image)

Melbourne

Melbourne (Victoria)

{{Location map | Australia Victoria
| width = 200
| label = Melbourne
| lat_deg=37  | lat_min=48 | lat_sec=49 | lat_dir=S
| lon_deg=144 | lon_min=57 | lon_sec=47 | lon_dir=E
}}

Location map many, using relief map (image1)

Yelta

Tidal River

Serviceton

Mallacoota

Locations in Victoria

{{Location map many | Australia Victoria
| relief   = yes
| width    = 200
| caption  = Locations in Victoria
| lat1 = -34.12 | long1 = 141.98 | label1 = Yelta
| lat2 = -39.03 | long2 = 146.32 | label2 = Tidal River
| lat3 = -36.37 | long3 = 140.98 | label3 = Serviceton
| lat4 = -37.55 | long4 = 149.75 | label4 = Mallacoota
}}

Location map+, using AlternativeMap

Yelta

Tidal River

Serviceton

Mallacoota

Locations in Victoria

{{Location map+ | Australia Victoria
| AlternativeMap = Australia Victoria location map highways.svg
| width   = 200
| caption = Locations in Victoria
| places  =
  {{Location map~ | Australia Victoria
  | lat = -34.12 | long = 141.98 | label = Yelta
  }}
  {{Location map~ | Australia Victoria
  | lat = -39.03 | long = 146.32 | label = Tidal River
  }}
  {{Location map~ | Australia Victoria
  | lat = -36.37 | long = 140.98 | label = Serviceton
  }}
  {{Location map~ | Australia Victoria
  | lat = -37.55 | long = 149.75 | label = Mallacoota
  }}
}}

See also

• Module:Location map/data/Australia

Location map templates

• Template:Location map, to display one mark and label using latitude and longitude
• Template:Location map many, to display up to nine marks and labels
• Template:Location map+, to display an unlimited number of marks and labels

Creating new map definitions

• Template:Location map/Creating a new map definition

The above documentation is transcluded from Module:Location map/data/Australia Victoria/doc. (edit | history)
Editors can experiment in this module's sandbox (create | mirror) and testcases (create) pages.
Subpages of this module.

return {
	name = 'Victoria',
	top = -33.8,
	bottom = -39.3,
	left = 140.6,
	right = 150.3,
	image = 'Australia Victoria location map.svg',
	image1 = 'Australia Victoria relief location map.jpg',
	image2 = 'Australia Victoria location map blank.svg',
	image3 = 'Australia Victoria relief location map blank.png',
	image4 = 'Australia Victoria location map highways.svg'
}