Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a21b215d7d6aa0d6

Jump to content

MacIP

From Wikipedia, the free encyclopedia

MacIP is a standard for encapsulating Internet Protocol (IP) packets within the AppleTalk Datagram Delivery Protocol (DDP), as LocalTalk only carries AppleTalk (unlike Ethernet, which carries multiple higher-layer protocols natively and simultaneously). This allows Macintosh computers with LocalTalk networking hardware to access TCP/IP-based network services, typically over Ethernet. This was an important bridging technology during the era when Ethernet and TCP/IP were rapidly growing in popularity in the early 1990s.

Software implementing MacIP, such as MacTCP or Open Transport, was installed on the computer, and a MacIP Gateway was placed elsewhere on the network. Applications that communicate through TCP/IP (such as Telnet) have their IP packets encapsulated in DDP, to carry IP in AppleTalk across the LocalTalk network to the MacIP Gateway. The MacIP Gateway strips off the DDP encapsulation and forwards the IP packet on the IP network.

The gateways were often implemented as part of a LocalTalk-to-Ethernet bridge device, small hardware systems primarily designed to allow communications between LocalTalk and EtherTalk equipped AppleTalk machines (like the Mac II and a LaserWriter). MacIP routing was often implemented as an optional adjunct to the AppleTalk routing. Cisco Systems supported[1] AppleTalk in their proprietary IOS (up to and including version 12.4(15)T14, on select platforms) which in turn could provide MacIP-Services.[2]

History

[edit]

The practice of encapsulating IP packets within DDP was originally developed at Stanford University[3][4] as the Stanford Ethernet–AppleTalk Gateway (SEAGATE) by Bill Croft in 1984 and 1985.[5]

The SEAGATE hardware was commercialized by Kinetics in 1985. The Kinetics Internet Protocol (KIP) was used to integrate with their FastPath LocalTalk-to-Ethernet bridge.[6] Apple Computer embraced the use of the encapsulation technology, which came to be known as MacIP.

One of the mandates for the Internet Engineering Task Force (IETF) "IP over AppleTalk" working group was to document existing MacIP implementations and to develop a specification for MacIP that could be proposed as a standard.[7] The draft document draft-ietf-appleip-MacIP was submitted, however it has expired without progressing to a standard.[8][9][10]

See also

[edit]

References

[edit]
[edit]