Edge Rewrite
everything Source code View original
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a21b002c4b3bee28

Jump to content

Load modulation

Add links
From Wikipedia, the free encyclopedia

Load Modulation is a method of sharing information from one device to another by means of modulating the load that the transmitting device imposes on a signal provided by the receiving device.

This is used, for example, to allow ISO/IEC 14443 and ISO/IEC 15693 NFC cards to reply to the reading device without the need for the NFC card to contain a power source. Instead, it is powered by the magnetic field provided by the reader, conveying its data back to the reader by switching a resistor or capacitor in and out of its antenna circuit, thus modulating the load that the card imposes upon the reader's field.[1][2]

References

[edit]
  1. ↑ "Understanding the Requirements of ISO/IEC 14443 for Type B Proximity Contactless Identification Cards" (PDF).
  2. ↑ Klaus Finkenzeller, Giesecke & Devrient GmbH. "Battery powered tags for ISO/IEC 14443, actively emulating load modulation" (PDF).


Retrieved from "https://en.wikipedia.org/w/index.php?title=Load_modulation&oldid=1309548018"