Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a4046ca26bfb24f4

Jump to content

// Workers AI · dad joke modeWhat did the LM386 say to its friend? You amp me up.

From Wikipedia, the free encyclopedia
LM386 in DIP-8 package

The LM386 is an integrated circuit containing a low-voltage audio power amplifier.[1] It is suitable for battery-powered devices such as radios, guitar amplifiers, and hobby electronics projects. The IC consists of an 8-pin dual in-line package (DIP-8) and can output 0.25 to 1 watts of power, depending on the model, using a 9-volt power supply.

Part numbers

[edit]

There are three different models of the LM386 that have slightly different specifications, outlined below.

Part
number
Supply voltage, V Min Speaker impedance, Ω Output power, mW
Min. Max. Min. Typical
LM386N-14124250325 @ Vs=6V, Rl=8Ω
LM386N-34124500700 @ Vs=9V, Rl=8Ω
LM386N-451847001000 @ Vs=16V, Rl=32Ω

Almost identical versions of the device are available from Unisonic (Unisonic Technologies Co. or UTC) as the LM386[2] and the New Japan Radio Co. Ltd. (JRC) as the NJM386[3] and NJM386B.[4]

The JRC devices are also available in a single-in-line package.[5]

JRC devices, marked as 386 JRC, are sometimes misleadingly referred to as the JRC386.

SPICE simulation models

[edit]

Although National Semiconductor and Texas Instruments (who bought National Semiconductor in 2011[6]) do not provide an official SPICE model for the LM386, there are two independently developed models freely available:

  • The original "No-Frills LM386 Model" by Dave Dilatush.[7]
  • An improved model, "The EasyEDA LM386EE spice model" developed for the simulations of the "Tesseract Guitar Practice Amplifier" project.[8]

Usage in guitar amplifiers

[edit]
  • The LM386 is one of the most common amps used in DIY guitar preamplifiers and sustainers due to its ability to run on a single 9V battery.
  • The well-known "Smokey Amp" created by Bruce Zinky uses an LM386 and is notable for being able to fit in a cigarette package.
  • The "Little Gem" and "Little Gem MkII" are modified/cloned versions of the "Smokey Amp".[9]
  • The "Ruby" amp[10] is a modified version of a Little Gem amplifier.

Usage in amateur radio

[edit]

The LM386 is very commonly used in the audio amplifier of low power QRP amateur radio rigs such as the Pixie.

See also

[edit]

References

[edit]
  1. ↑ "Data Sheet (National Semiconductor)" (PDF). Texas Instruments. 2017. Retrieved 26 Nov 2021.
  2. ↑ "Data Sheet (Unisonic Technologies Co.)" (PDF). Unisonic Technologies Co. 2014. Retrieved 2 Sep 2015.
  3. ↑ "Data Sheet (New Japan Radio Co. Ltd.)" (PDF). New Japan Radio Co. Ltd. Retrieved 29 Aug 2015.
  4. ↑ "Data Sheet (New Japan Radio Co. Ltd.)" (PDF). New Japan Radio Co. Ltd. Retrieved 2 Sep 2015.
  5. ↑ "Single-in-line package outline drawing (New Japan Radio Co. Ltd.)" (PDF). New Japan Radio Co. Ltd. Retrieved 2 Sep 2015.
  6. ↑ "Texas Instruments completes acquisition of National Semiconductor".
  7. ↑ "LM386 audio amp Spice model?".
  8. ↑ "The EasyEDA Tesseract Guitar Practice Amp simulation files".
  9. ↑ "Little Gem amps at runoffgroove".
  10. ↑ "Ruby amp at runoffgroove".
[edit]
Historical Data Books