Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a24d2eaafbb3a40c

Jump to content

Hayward Lake

Hayward Lake
Hayward Lake is located in British Columbia
Hayward Lake
Hayward Lake
Location within British Columbia
LocationMission, British Columbia
Coordinates49°12′N 122°23′W / 49.20°N 122.39°W / 49.20; -122.39
Typereservoir
Stave River
Stave River
Basin countriesCanada

Hayward Lake is a lake and reservoir on the Stave River in the Lower Mainland of British Columbia, Canada. Located in the District of Mission about 60 km east of Vancouver, Hayward Lake is formed by Ruskin Dam, which lies about 3 km upstream from the Stave River's confluence with the Fraser River at Ruskin, which sits astride the Mission-Maple Ridge boundary. The lake begins at the tailrace from the Stave Falls Dam and is about 7.5 km in length and an average of 0.5 km wide, with a maximum width of 1.5 km when lengths of small inlets are taken into account.

History

[edit]

Though cleared of debris since, for many years Hayward Lake was a flooded forest full of dead trees, which had not been logged by the time of the inundation of the canyon of the Stave River, which lies today in the lake's depths behind Ruskin Dam. The original roadbed of the Stave Falls Branch of the British Columbia Electric Railway climbed the canyon walls, now underwater, but the line was rebuilt as part of the construction of Ruskin Dam and its track along the west side of the lake is now a hiking and biking trail. Trestles used by the railway are still present along this route, although their ends have been demolished to prevent access for safety reasons. The west side trail, and a hiking-only route on the east side of the lake, are part of a BC Hydro recreation division project; a park at the lake's upper end, where there had been a townsite during construction of the Stave project, now has a public beach and includes a bandstand built for the filming of We're No Angels above Stave Dam and moved to its present location afterwards.

The lake is named for the first operations manager of the Stave Powerhouse.

Recreation

[edit]

In addition to the public beach at the Stave Falls end of the lake, there are small beaches along the lakeside trail. Canoeing on the lake is now mostly safe though some "snags" remain; power boats are not permitted, and canoeing or swimming within 1 km of Ruskin Dam is prohibited due to the risk of being sucked into the Ruskin Powerhouse's intakes, with a log-boom drawn across from shore to shore as a reminder.

See also

[edit]

References

[edit]
  • "Hayward Lake". BC Geographical Names. Government of British Columbia – B.C. Geographical Names Office (BCGNO).
  • BC Hydro Hayward Lake Recreation Site webpage
  • Hydro Parks Crackle With Fall, column by Jack Christie in the Georgia Straight weekly magazine, Oct 9, 2006