Flushing hydrant
 | This article needs more citations. (December 2025) |
A flushing hydrant is a hydrant that is used for flushing a water line of silt, rust, debris, or stagnant water. Many water utilities use standard fire hydrants for flushing their lines. Specialized flushing hydrants are often smaller and less expensive than a fire hydrant to reduce cost where fire fighting use is not needed or practical. Many flushing hydrants are "unidirectional": they only have one outlet, in contrast to fire hydrants, which normally have two or three.[1]
Flushing hydrants are commonly installed at the end of dead-end water lines.
See also
[edit]References
[edit]- ↑ "Distribution System Water Quality Protecting Water Quality Through Distribution System Flushing" (pdf). epa.gov. April 1, 2022. Retrieved December 10, 2025.
Flushing can be an important maintenance technique to remove stagnant water, restore disinfectant residual, remove loose deposits, and scour pipe surfaces. Flushing can reduce water age and address water quality complaints.
 | This engineering-related article is a stub. You can help Wikipedia by adding missing information. |