Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a21b2b42dd55554f

Jump to content

Fire point

From Wikipedia, the free encyclopedia

The fire point, or combustion point, of a fuel is the lowest temperature at which the liquid fuel will continue to burn for at least five seconds after ignition by an open flame of standard dimension.[1] At the flash point, a lower temperature, a substance will ignite briefly, but vapour might not be produced at a rate to sustain the fire. Most tables of material properties will only list material flash points. In general, the fire point can be assumed to be about 10 °C higher than the flash point,[2] although this is no substitute for testing if the fire point is safety critical.[2]

Testing of the fire point is done by open cup apparatus.[2][3]

See also

[edit]

Notes

[edit]
  1. Steven A., Treese; Peter R., Pujado; David S. J., Jones (2015). Handbook of Petroleum Processing (2 ed.). Springer. p. 1736. ISBN 978-3-319-14528-0.
  2. 1 2 3 "Flash Point and Fire Point". Archived from the original on 2010-12-14. Retrieved 2010-05-27.
  3. "Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester", ASTM.org