Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a2378b3a2e17a53e

Jump to content

// Workers AI · dad joke modeWhat did Fast Reroute say to the traffic? "Route"-inely helping you detour.

From Wikipedia, the free encyclopedia

Fast Reroute is a MPLS (Multiprotocol Label Switching) and IP resiliency technology to provide fast traffic recovery upon link or router failures for mission critical services.[1] Upon any single link or node failures, it could be able to recover impacted traffic flows in the level of 50 ms. Industrial implementations can be seen in vendors such as Cisco, Juniper, Brocade, Alcatel-Lucent etc.

In the IP domain Loop-Free Alternates (LFAs) and not-via technology have been used to immediately recover data packet upon the failure of a default next-hop.

Link protection vs Node protection

Methods of backup

[edit]

Backup path can be configured for:[2]

1. Link protection

2. Node protection

There are two methods to back up an LSP:

1. One to One - this method creates detour LSPs for each protected LSP at each potential point of local repair

2. Facility - this method creates a bypass tunnel to protect a potential failure point

References

[edit]
  1. "IP Routing: Protocol-Independent Configuration Guide, Cisco IOS XE Release 3S - IPv4 Loop-Free Alternate Fast Reroute [Cisco IOS XE 3S]". Cisco. Retrieved 2019-05-19.
  2. Swallow, George; Pan, Ping; Atlas, Alia. "Fast Reroute Extensions to RSVP-TE for LSP Tunnels". tools.ietf.org. Retrieved 2019-05-19.