Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a29ccbc8ec4f7fd8

Jump to content

Eakin Mill Covered Bridge

Eakin Mill Covered Bridge
Northern side of the bridge
Eakin Mill Covered Bridge is located in Ohio
Eakin Mill Covered Bridge
Location within Ohio
Eakin Mill Covered Bridge is located in the United States
Eakin Mill Covered Bridge
Location within the United States
LocationMound Hill Rd., Arbaugh, Ohio
Coordinates39°10′16″N 82°20′13″W / 39.17111°N 82.33694°W / 39.17111; -82.33694
Arealess than one acre
Built1870
ArchitectGilman & Ward Co.
Architectural styleKing post truss
NRHP reference No.76001539[1]
Added to NRHPMarch 16, 1976

The Eakin Mill Covered Bridge (also known as the "McLaughlin Bridge" or the "Geer's Mill Bridge") is a historic covered bridge in Vinton County, Ohio, United States. Located southeast of the county seat of McArthur, this bridge carries Mound Hill Road near the community of Arbaugh.[1]

Built in 1870,[1] the Eakin Mill Bridge was constructed across the Big Raccoon Creek by the McArthur contracting firm of Gilman and Ward. Like many other covered bridges built in Ohio during the late nineteenth century, the Eakin Mill Bridge features the king post truss design; unlike most others, this bridge was built with multiple king posts, enabling it to be significantly stronger than the average bridge that was built with a single king post. This sturdiness was necessitated by the Eakin Mill, a busy gristmill along the Big Raccoon; many other covered bridges spanned the stream, but the frequent mill traffic forced the builders to use an extraordinarily strong design.[2] Gilman and Ward built their bridge on stone piers and roofed it with metal;[3] like many other covered bridges,[2] its walls are weatherboarded.[3]

With the developments of modern truck transportation, the Eakin Mill Covered Bridge became less well suited to daily operation. Many trucks crossed the bridge while carrying loads heavier than they were permitted to carry, and the bridge sustained significant structural damage; accordingly, it was closed and replaced. Nevertheless, the bridge remains in its original location, and it has been designated a historic site.[2] In 1976, the Eakin Mill Covered Bridge was listed on the National Register of Historic Places,[1] qualifying both because of its historically significant engineering and because of its place in Ohio's history.[3]

References

[edit]
  1. 1 2 3 4 "National Register Information System". National Register of Historic Places. National Park Service. March 13, 2009.
  2. 1 2 3 Owen, Lorrie K., ed. Dictionary of Ohio Historic Places. Vol. 2. St. Clair Shores: Somerset, 1999, 1367.
  3. 1 2 3 Eakin Mill Covered Bridge, Ohio Historical Society, 2007. Accessed 2010-08-08.