Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a457e33fae6736cd

Jump to content

// Workers AI · dad joke modeWhat did the coffin lock say? I'm dead bolted.

From Wikipedia, the free encyclopedia
Views of a few types of coffin lock

Coffin lock is a slang term for a blind panel connector (also called a butt-joint fastener) often used in scenic construction to join together stage decks or scenery in a butt joint. These are two part connectors (male and female) that draw together and lock. The two most common types are the cam and acceptor and more traditional hook and pin version. These devices generally use a hex key to operate the locking mechanism via a small diameter hole either through the face or rear of the panel. When locked, the considerable mechanical advantage offered by the cam or hook holds the panels tightly together. Coffin locks can be installed directly into a mortise cut into each panel for total concealment except for the locking hole or mounted to the rear of the panels. Many small theatres use stock platforms with coffin locks built into the frames.[1]

References

[edit]
  1. ↑ "Concealed panel/door locks" (PDF). Pann Elcom. Archived from the original (PDF) on 2017-12-30. Retrieved 2017-12-29.