Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a223c7524ed6d685

Jump to content

Buzzer

From Wikipedia, the free encyclopedia

A buzzer or beeper is an audio signaling device,[1] which may be mechanical, electromechanical, or piezoelectric (piezo for short). Typical uses of buzzers and beepers include alarm devices, timers, train and confirmation of user input such as a mouse click or keystroke.

History

[edit source]

Electromechanical

[edit source]

The electric buzzer was invented in 1831 by Joseph Henry. They were mainly used in early doorbells until they were phased out in the early 1930s in favor of musical chimes, which had a softer tone.[2]

Piezoelectric

[edit source]

Piezoelectric buzzers, or piezo buzzers, as they are sometimes called, were invented by Japanese manufacturers and fitted into a wide array of products during the 1970s to 1980s. This advancement mainly came about because of cooperative efforts by Japanese manufacturing companies. In 1951, they established the Barium Titanate Application Research Committee, which allowed the companies to be "competitively cooperative" and bring about several piezoelectric innovations and inventions.[3]

Electromechanical

[edit source]

Early devices were based on an electromechanical system identical to an electric bell without the metal gong. Similarly, a relay may be connected to interrupt its own actuating current, causing the contacts to buzz (the contacts buzz at line frequency if powered by alternating current) Often these units were anchored to a wall or ceiling to use it as a sounding board. The word "buzzer" comes from the rasping noise that electromechanical buzzers made.

Mechanical

[edit source]

A joy buzzer is an example of a purely mechanical buzzer and they require drivers. Other examples of them are doorbells.

Piezoelectric

[edit source]
Piezoelectric disk beeper

A piezoelectric element may be driven by an oscillating electronic circuit or other audio signal source, driven with a piezoelectric audio amplifier. Sounds commonly used to indicate that a button has been pressed are a click, a ring or a beep.

Interior of a readymade loudspeaker, showing a piezoelectric-disk-beeper (With 3 electrodes ... including 1 feedback-electrode ( the central, small electrode joined with red wire in this photo), and an oscillator to self-drive the buzzer.

A piezoelectric buzzer/beeper also depends on acoustic cavity resonance or Helmholtz resonance to produce an audible beep.[4]

Modern applications

[edit source]

While technological advancements have caused buzzers to be impractical and undesirable[citation needed], there are still instances in which buzzers and similar circuits may be used. Present day applications include:

See also

[edit source]

References

[edit source]
  1. "buzzer - definition of buzzer by The Free Dictionary". Retrieved 22 May 2015.
  2. "The History of the Doorbell by 1800doorbell.com". www.1800doorbell.com. Retrieved 2015-07-12.
  3. "Piezo Systems: History of Piezoelectricity". www.piezo.com. Archived from the original on 2013-10-11. Retrieved 2015-07-12.
  4. "Design of a Helmholtz Chamber - PUI Audio | A Projects Unlimited Company located in Dayton, Ohio".