Bughole
 | This article needs more citations. (November 2018) |
A bughole (or pinhole) is a small hole in the surface of a concrete structure caused by the expansion and eventual outgassing of trapped pockets of air in setting concrete.[1][2][3] Bugholes are undesirable, as they may compromise the structural integrity of concrete emplacements.
Bughole-induced outgassing is a phenomenon occurring when applying a protective coating (or lining) to concrete (predominantly vertically cast-in-place) where air becomes trapped within bughole cavities and releases into or through the protective coating, thereby causing pinholes and holidays in the coating film.[4]
References
[edit]- ↑ Preventing Air-Induced Coating Failures on Concrete (PDF), JPCL, January 2007, archived from the original (PDF) on 2014-10-22, retrieved 2014-10-21
- ↑ Solvent-Free sealant creates smooth concrete surface for coating, Bayer Coatings, retrieved 2014-10-21
- ↑ Bugholes, Portland Cement Association, retrieved 2014-10-21
- ↑ Thin-Patch Repair of Concrete in Wastewater Environments Using Commercially Available Cementitious Resurfacers (PDF), Concrete Repair Bulletin, January 2008, retrieved 2014-10-21[permanent dead link]
 | This article about a civil engineering topic is a stub. You can help Wikipedia by adding missing information. |