Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a23d5bfcef6e4a3e

Jump to content

Birkenhead Bridge

Birkenhead Bridge
Birkenhead Bridge in February 2010
Coordinates34°50′32″S 138°30′03″E / 34.84230°S 138.50093°E / -34.84230; 138.50093
CarriesNelson Street
CrossesPort River
LocaleLefevre Peninsula
OwnerDepartment for Infrastructure & Transport
Preceded by
Tom 'Diver' Derrick Bridge
Followed by
Jervois Bridge
Characteristics
DesignBascule
Total length246 metres
Width16 metres
5.4 metres
No. of lanes4 (as built)
2 (since 2014)
History
Constructed byAdelaide Construction
Fabrication byPerry Engineering
Opened14 December 1940
Location
Map
Interactive map of Birkenhead Bridge

The Birkenhead Bridge is a bascule bridge in Adelaide, Australia that crosses the Port River.

In February 1938, the Government of South Australia awarded a contract to Adelaide Construction to build a bridge across the Port River from Birkenhead to Port Adelaide, with Perry Engineering contracted to supply the steelwork.[1] The bridge was opened on 14 December 1940 by Governor Malcolm Barclay-Harvey.[2][3] It was one of only four bascule bridges in the world adapted for use by trolleybuses.[4][5]

In 2014, two of the four road lanes were converted into pedestrian and bike paths.[6] In 2020, the timber road deck was replaced with fibre reinforced polymer and the timber footpath with aluminium.[7][8]

The bridge is listed on the South Australian Heritage Register.[9]

References

[edit]
[edit]

Wikimedia Commons logo Media related to Birkenhead Bridge at Wikimedia Commons