Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a25287a43a72b36e

Jump to content

// Workers AI · dad joke modeWhat did the 2N3906 say? I'm a transistor parent, I have many connections.

From Wikipedia, the free encyclopedia
2N3906 transistors in plastic TO-92 packaging. The cases are marked with E, B, and C for lead identification.
Photomicrograph of the transistor chip inside a 2N3906 transistor package, showing the conductive metal layers used to connect the semiconductor junctions to the package leads. The upper-left and lower-right quadrants are bonding pad areas where wires for two of the terminals are attached, and the other two quadrants have the actual transistor structures, in a bulk region that is contacted at the back side of the chip to the third terminal.

The 2N3906 is a commonly used PNP bipolar junction transistor intended for general purpose low-power amplifying or switching applications.[1][2] It is designed for low electric current and power and medium voltage, and can operate at moderately high speeds. It is complementary to the 2N3904 NPN transistor.[3] Both types were registered by Motorola Semiconductor in the mid-1960s.

Device packaging and specifications

[edit]

The 2N3906 is manufactured in a plastic TO-92 case. When looking at the flat side with the leads pointed downward, the three leads emerging from the case are, from left to right, the emitter, base, and collector leads.

The 2N3906 is specified by a collector current of 200 mA, collector-base and collector-emitter voltages of 40 V, for power dissipation of 300 mW. Its transition frequency Ft is 250 MHz, with a beta of at least 100.[1]

Part numbers

[edit]

The 2N3904 (NPN) and 2N3906 (PNP) are complementary transistor pairs. These transistors are available in package styles TO-92, SOT23, SOT223 with different prefixes.

Transistor part numbers
BJT Thru-hole Surface-mount
TO92SOT23SOT223
NPN2N3904[3]MMBT3904[4]PZT3904
PNP2N3906[1]MMBT3906PZT3906

See also

[edit]

References

[edit]
  1. 1 2 3 "2N3906 Datasheet (TO-92)" (PDF). ON Semiconductor. February 2010. Archived (PDF) from the original on August 8, 2019.
  2. "2N3906 Datasheet (TO-92)" (PDF). Micro Commercial Components (MCC). January 2013. Archived (PDF) from the original on August 8, 2019.
  3. 1 2 "2N3904 Datasheet (TO-92)" (PDF). ON Semiconductor. August 2012. Archived (PDF) from the original on August 8, 2019.
  4. "MMBT3904 Transistor". el-component.com.

Further reading

[edit]
Historical Databooks
[edit]