First-hop redundancy protocol
(Redirected from First Hop Redundancy Protocols)
First hop redundancy protocols (FHRP) are a category of networking protocols designed to protect the default gateway used on a subnetwork by allowing two or more routers to provide backup for that address.[1][2][3] In the event of failure of an active router, the backup router will take over the address, usually within a few seconds. In practice, such protocols can also be used to protect other services operating on a single IP address, not just routers.
Examples of such protocols include (in approximate order of creation):
- Hot Standby Router Protocol (HSRP) - Cisco's initial, proprietary standard developed in 1998[4]
- Virtual Router Redundancy Protocol (VRRP) - an open (albeit patent-encumbered) standard protocol based largely on Cisco's HSRP
- Common Address Redundancy Protocol (CARP) - patent-free, unencumbered alternative to Cisco's HSRP and the IETF's VRRP, developed in October 2003
- Extreme Standby Router Protocol (ESRP) - Extreme Networks' proprietary standard with fast failover and layer 2 protection
- Gateway Load Balancing Protocol (GLBP) - a more recent proprietary standard from Cisco that permits load balancing as well as redundancy
- Routed Split multi-link trunking (R-SMLT) - an Avaya redundancy protocol
- NetScreen Redundancy Protocol (NSRP) - a Juniper Networks proprietary router redundancy protocol providing load balancing
- Chassis Cluster Redundant Ethernet - a Juniper Networks proprietary Ethernet redundancy protocol, used on its SRX platform[5]
- Multi-active Gateway Protocol (MAGP) - a Mellanox proprietary protocol based on VRRP that allows active-active operation[6]
References
[edit]- ↑ Wendell Odom; Jason Gooley; David Hucaby (5 August 2024). "First Hop Redundancy Protocols". Cisco Press.
The term First Hop Redundancy Protocol (FHRP) refers to the category of protocols that enable hosts to take advantage of redundant routers in a subnet.
- ↑ "First Hop Redundancy Protocol (FHRP)". Cisco. Retrieved 2019-06-05.
- ↑ gokhankosem (2018-10-16). "First Hop Redundancy Protocols". IpCisco. Retrieved 2019-06-05.
- ↑ "Cisco Protocols: HSRP, VRRP, GLBP". Petri. 2012-04-11. Retrieved 2019-06-05.
- ↑ "Chassis Cluster Redundant Ethernet Interfaces - TechLibrary - Juniper Networks". Juniper Networks. 2019-05-30. Retrieved 2019-06-09.
- ↑ "HowTo Configure MAGP on Mellanox Switches". community.mellanox.com. 1 March 2020.
 | This computer networking article is a stub. You can help Wikipedia by adding missing information. |