Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a2729d076a49612b

Jump to content

// Workers AI · dad joke modeWhat did the SAIC Kavachi engine say? I'm exhausted.

From Wikipedia, the free encyclopedia
(Redirected from SAIC Kavachi Engine)
Kavachi engine TCI-Tech
Overview
ManufacturerSAIC Motor
Production2008–2017
Layout
ConfigurationStraight-four
Displacement1.8 L (1,796 cc; 109.6 cu in)
Cylinder bore80 mm (3.15 in)
Piston stroke89.3 mm (3.52 in)
Cylinder block materialAluminum
Cylinder head materialAluminum
ValvetrainDOHC 4 valves x cyl. with VVC
Combustion
Fuel systemMulti-port fuel injection
Fuel typeGasoline
Oil systemWet sump
Cooling systemWater-cooled
Output
Power output131 hp (98 kW) at 6,000 rpm (naturally aspirated)
158 hp (118 kW) at 5,500 rpm (turbocharged)
Torque output168 N⋅m (124 lb⋅ft) at 4,500 rpm (naturally aspirated)
215 hp (160 kW) at 2,500–4,500 rpm (turbocharged)
Chronology
PredecessorRover K-series engine

The Kavachi engine, commonly known as the TCI-Tech, was developed by SAIC Motor, based on a re-engineering of the Rover K-series engine.[1] It is used in Roewe and MG Motor vehicles.

The 1796cc Kavachi engine is produced in two versions, a naturally aspirated producing 98 kW (131 bhp; 133 PS) at 6,000 rpm and 168 N⋅m (124 lb⋅ft) at 4,500 rpm, and a turbocharged version producing 118 kW (158 bhp) at 5,500 rpm and 215 N⋅m (159 lb⋅ft) of torque from 2,500 to 4,500 rpm. It is Drive-by-wire.[citation needed]

UK engineering firm Ricardo plc were tasked with remedying the well known faults of the K series by SAIC Motor for its introduction into the Chinese marketplace. With a redesigned head, improved waterways, stiffened block as well as changing the manufacturing process and quality of material, the Kavachi is seen as the pinnacle of K-series development. As of 2015, with more than half a decade in the market, there have been no reported issues of head gasket failure on cars using the Kavachi engine.[citation needed]

A point to note, the Kavachi engine is sometimes referred to and often confused with the N Series engine. The N Series is also a development of the original K Series but was in fact produced by Nanjing Automobile (NAC) a rival company at the time to SAIC. (later merged)[citation needed]

N Series was fitted into the relaunched MG TF in the UK and in the MG3 SW and MG7 in China.[citation needed]

Applications

[edit]

References

[edit]
  1. "Dongfeng to launch own-brand Joyear SUV in '10". Gasgoo. 2 July 2009. Archived from the original on 19 August 2014. Retrieved 15 August 2014.
  2. "Features & Specs". MG. Retrieved 15 August 2014.
[edit]