Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a43343e90b644b2a

Jump to content

// Workers AI · dad joke modeWhat did the Lancer 30 Mark V say? "I'm a mark above the rest.

From Wikipedia, the free encyclopedia
(Redirected from Lancer 30-5)

Lancer 30 Mark V
Development
DesignerC&C Design
LocationUnited States
Year1980
BuilderLancer Yachts
RoleCruiser
Boat
Displacement8,200 lb (3,719 kg)
Draft5.20 ft (1.58 m)
Hull
Typemonohull
Constructionfiberglass
LOA29.50 ft (8.99 m)
LWL24.00 ft (7.32 m)
Beam10.00 ft (3.05 m)
Engineinboard motor
Hull appendages
Keelfin keel
Ballast3,000 lb (1,361 kg)
Rudderinternally-mounted spade-type rudder
Rig
Rig typeBermuda rig
I foretriangle height
34.00 ft (10.36 m)
J foretriangle base
10.80 ft (3.29 m)
P mainsail luff
35.50 ft (10.82 m)
E mainsail foot
13.00 ft (3.96 m)
Sails
Sailplanfractional rigged sloop
Mainsail area230.75 sq ft (21.437 m2)
Jib/genoa area
183.60 sq ft (17.057 m2)
Total sail area
414.35 sq ft (38.494 m2)

The Lancer 30 Mark V, also called the Lancer 30 -5, is an American sailboat that was designed by C&C Design as a cruiser and first built in 1980.[1][2][3]

The Lancer 30 Mark V is a development of the Lancer 30 Mark IV, which traces its origins to the C&C 30 molds.[1][3]

Production

[edit]

The design was built by Lancer Yachts in the United States, between 1980 and 1985, but it is now out of production.[1][3][4]

Design

[edit]

The Lancer 30 Mark V is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop rig, a raked stem; a raised counter, reverse transom; an internally mounted spade-type rudder controlled by a tiller and a fixed fin keel. It displaces 8,200 lb (3,719 kg) and carries 3,000 lb (1,361 kg) of ballast.[1][3]

The boat has a draft of 5.20 ft (1.58 m) with the standard keel.[1][3]

The boat is fitted with an inboard engine for docking and maneuvering. The fuel tank holds 24 U.S. gallons (91 L; 20 imp gal) and the fresh water tank also has a capacity of 24 U.S. gallons (91 L; 20 imp gal).[1][3]

The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin with a drop leaf table and an aft cabin with a double berth on the port side. The galley is located on the starboard side amidships. The galley is an open "L"-shape and is equipped with a two-burner stove and a double sink. The head is located on the starboard side at the companionway steps.[1][3]

The design has a hull speed of 6.57 kn (12.17 km/h).[3]

See also

[edit]

References

[edit]
  1. 1 2 3 4 5 6 7 McArthur, Bruce (2020). "Lancer 30-5 sailboat". sailboatdata.com. Retrieved 10 July 2021.{{cite web}}: CS1 maint: deprecated archival service (link)
  2. ↑ McArthur, Bruce (2020). "C&C Design 1961 - 2017". sailboatdata.com. Retrieved 9 July 2021.{{cite web}}: CS1 maint: deprecated archival service (link)
  3. 1 2 3 4 5 6 7 8 Sea Time Tech, LLC (2022). "Lancer 30-5". sailboat.guide. Retrieved 18 April 2022.{{cite web}}: CS1 maint: deprecated archival service (link)
  4. ↑ McArthur, Bruce (2021). "Lancer Yacht Corp. (USA) 1974 - 1986". sailboatdata.com. Retrieved 10 July 2021.{{cite web}}: CS1 maint: deprecated archival service (link)
[edit]