Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a427a8f7eed9eefa

Jump to content

Lancer 30 Mark III

From Wikipedia, the free encyclopedia
(Redirected from Lancer 30-3)

Lancer 30 Mark III
Development
DesignerC&C Design
LocationUnited States
Year1979
BuilderLancer Yachts
RoleCruiser
Boat
Displacement8,200 lb (3,719 kg)
Draft5.20 ft (1.58 m)
Hull
Typemonohull
Constructionfiberglass
LOA29.50 ft (8.99 m)
LWL24.00 ft (7.32 m)
Beam10.00 ft (3.05 m)
Hull appendages
Keelfin keel
Ballast3,000 lb (1,361 kg)
Rig
Rig typeBermuda rig
I foretriangle height
35.00 ft (10.67 m)
J foretriangle base
12.90 ft (3.93 m)
P mainsail luff
29.00 ft (8.84 m)
E mainsail foot
9.80 ft (2.99 m)
Sails
Sailplanmasthead sloop
Mainsail area142.10 sq ft (13.202 m2)
Jib/genoa area
225.75 sq ft (20.973 m2)
Total sail area
367.85 sq ft (34.174 m2)

The Lancer 30 Mark III or Lancer 30-3, is an American sailboat that was designed by the Canadian firm C&C Design as a cruiser and first built in 1979.[1][2][3]

A development of the Lancer 30 Mark II, which came from the same molds as the C&C 30, the Lancer 30 Mark III design was developed into the Lancer 30 Mark IV.[1][3]

Production

[edit]

The design was built by Lancer Yachts in the United States starting in 1979, but it is now out of production.[1][3][4]

Design

[edit]

The Lancer 30 Mark III is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a masthead sloop rig and a fixed fin keel. It displaces 8,200 lb (3,719 kg) and carries 3,000 lb (1,361 kg) of ballast.[1][3]

The boat has a draft of 5.20 ft (1.58 m) with the standard keel and a hull speed of 6.57 kn (12.17 km/h).[1][3]

See also

[edit]

References

[edit]
  1. 1 2 3 4 5 McArthur, Bruce (2020). "Lancer 30-3 sailboat". sailboatdata.com. Retrieved 8 July 2021.{{cite web}}: CS1 maint: deprecated archival service (link)
  2. ↑ McArthur, Bruce (2020). "C&C Design 1961 - 2017". sailboatdata.com. Retrieved 8 July 2021.{{cite web}}: CS1 maint: deprecated archival service (link)
  3. 1 2 3 4 5 Sea Time Tech, LLC (2022). "Lancer 30-3". sailboat.guide. Retrieved 18 April 2022.{{cite web}}: CS1 maint: deprecated archival service (link)
  4. ↑ McArthur, Bruce (2021). "Lancer Yacht Corp. (USA) 1974 - 1986". sailboatdata.com. Retrieved 8 July 2021.{{cite web}}: CS1 maint: deprecated archival service (link)