Edge Rewrite
// HTMLRewriter · presentation

This page was redesigned at the edge.

Cloudflare fetched the original article and streamed it through HTMLRewriter to apply an entirely new visual system without rebuilding the source page.

// request.cf · coarse context

A page that knows where it met you.

Only coarse request metadata is shown. This demo does not display or persist visitor IP addresses.

Country
US
Cloudflare location
CMH
Connection
HTTP/2
Language
Not provided

Ray ID: a25c0d3b1def3337

Jump to content

LM358

From Wikipedia, the free encyclopedia
(Redirected from LM358N)
Philips LM358D
LM358 pinout
LM358 die photo

The LM358 is a low-power dual operational amplifier integrated circuit, originally introduced by National Semiconductor.[1]

It uses a single power supply from +3 to +30 volts for VCC (though some variants go higher, such as 36 volts for the LM358B).

Input voltage can range from −0.3 volts to VCC. Small negative input voltages below ground (GND) are acceptable because the bipolar junction transistors at the input stage are configured such that their base-emitter junction voltage provides just enough voltage differential between the collector and base for the transistors to function.[2]


History

[edit]

After the development of the μA741 and its dual and quad derivatives, National Semiconductor's Russell and Frederiksen developed an amplifier design suitable for low-voltage single supply packages,[3][4] hinging on an input stage gm reduction technique due to James Solomon.[5][4] This was developed into the LM324, which quickly became the industry standard quad op-amp.[4] The LM358 followed shortly, a similar dual design, joining a group of low cost, decades old industry standards.[4]

References

[edit]
  1. "LM358 data sheet, product information and support | TI.com". www.ti.com. Retrieved 2025-09-28.
  2. Elliott, Rod (2016). "Voltage Followers". sound-au.com. Figure 5. Archived from the original on 2021-08-01. Retrieved 2022-07-27.
  3. Ronald Russell, Thomas Frederiksen, “Automotive and Industrial Electronic Building Blocks,” IEEE Journal of Solid-State Circuits, Vol. SC-7, December 1972, pp. 446–454.
  4. 1 2 3 4 Op Amp Applications Handbook, Walt Jung, Editor, 2005, e Analog Devices Series, page 809 Oxford and Burlington, Newnes
  5. James Solomon, “The Monolithic Operational Amplifier: A Tutorial Study,” IEEE Journal of Solid State Circuits, Vol. SC-9, No. 6, December 1974.

Further reading

[edit]

The LM358 is now an industry-standard part manufactured by multiple companies, all of which publish datasheets: