// Workers AI · dad joke modeWhat did the slick say? It's a cutting remark.
(Redirected from Framing Slick)
 | This article includes a list of general references but lacks sufficient corresponding inline citations. (September 2025) |
A slick is a large chisel, characterized by a wide (2-4 inches, 5–10 cm), heavy blade, and a long, frequently slender, socketed handle. The combined blade and handle can reach two feet (60 cm) in length. The blade of a slick may be slightly curved lengthwise, and/or the handle socket is cranked upward, such that the handle and socket clear the surface of the work when the edge is touching. This distinguishes the slick from the similarly sized, short-handled millwright's chisel.
Use
[edit]A slick is always pushed; never struck (thus the slender handle). Using a combination of the tool's weight and bracing the handle against the shoulder or upper arm, fine paring cuts are made. Slicks are typically used by shipwrights and timber framers.[1]
.jpg)
See also
[edit]- Twybil – Hand tool used for chopping out mortises in green woodworking
References
[edit]- ↑ Young, Susan (2018-06-22). "Carpenter's Slick". Shiloh Museum of Ozark History. Retrieved 2026-06-04.
- Barlow, Ronald (1985). The Antique Tool Collector's Guide to Value. El Cajon: Windmill Pub. Co. ISBN 0-933846-01-0.
